TOOTHACHE!!!
09-02-2009, 05:55 PM
#3
Senior Member
RACING JUNKIE
Join Date: Jul 2009
Location: Clarksville, TN
Posts: 1,922
Originally Posted by bjuice
Dennis are you asking how Much NOS can be run on 92 octane fuel or How much NOS can be Run thru a Pump gas (low compression) Motor using High octane Racing Fuel ?
:shock: :shock: Thats my name too!!! :shock: :shock:
09-02-2009, 07:56 PM
#6
Administrator
RACING JUNKIE
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
not a lot...i think Nos phamplet says up to 100hp NOS on 93 octane...then from there they suggest the better gas...
you would still need to back out about 4 degrees of timing to be safe at 100 shot with 93 octane
it would also depend where your static compression is...example: 7:1 can probaly handle a little more than a 10:1 static compression motor....and both engines are Pump gas...one is just on the low end while the other is on the higher end.
you would still need to back out about 4 degrees of timing to be safe at 100 shot with 93 octane
it would also depend where your static compression is...example: 7:1 can probaly handle a little more than a 10:1 static compression motor....and both engines are Pump gas...one is just on the low end while the other is on the higher end.
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
09-03-2009, 06:28 AM
#7
Senior Member
RACING JUNKIE
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Originally Posted by chrisr
Just keep adding until it blows up, rebuild it and pill it down a hair from where it blew at and you'll be fine. :lol: :lol: :lol: :lol:
09-03-2009, 06:53 PM
#10
Senior Member
SENIOR BUILDER
Join Date: Feb 2005
Location: LAWTON MI
Posts: 113
Re: TOOTHACHE!!!
Originally Posted by lively
How much nitrous can be used on a "pump gas" engine? 200? 300? ?????400 :x :x
THANKS GUYS, LIVELY
THANKS GUYS, LIVELY
I have sprayed 150 on 92 pump maybe 8-10 times over a 5yr period
On my 11.5:1 406 runs 10:30s on 92 9:70 on 150/92
Pulled the motor down twice over the 5yr’s just to check the bearings
And they looked great so back together it went
