sbc H.P. gain with SHP Block

Old 06-23-2009, 03:09 PM
  #1  
et7333
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Sep 2003
Posts: 259
Default sbc H.P. gain with SHP Block

Ok what do you guys think if I change my current stock 350 oem block with this combo,383,13-1,.558 int,.550 ex,260,[email protected] comp flat tappet,stock 215 Dart Iron Eagle Platinums,Manley 6 inch rods,Super Victor port matched,750 APD Alky carb, in my 3100 lb 68 camaro,to a Dart SHP .030 block with 14-1 Mahle pistons,block from CNC Carl,and use the same heads,cam,crank,intake,will I see any power increase?
et7333 is offline  
Old 06-23-2009, 04:41 PM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

A block isnt going to just gain you hp ? actually I think this block is more weight then your stock so you'd slow down there, the one point of comp I have found is worth slim to none on mine.
hammertime is offline  
Old 06-23-2009, 05:10 PM
  #3  
et7333
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Sep 2003
Posts: 259
Default

The block is 15 lbs heavier...Thx for info
et7333 is offline  
Old 06-23-2009, 06:13 PM
  #4  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

You would be better off spending the money on some aluminum heads and a roller cam
kwkracing is offline  
Old 06-23-2009, 09:19 PM
  #5  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Originally Posted by kwkracing
You would be better off spending the money on some aluminum heads and a roller cam
X2 stick a big roller in that thing, you'll never go back.
cepx111 is offline  
Old 06-24-2009, 04:56 AM
  #6  
hink
Senior Member
EXPERT BUILDER
 
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Default

Originally Posted by hammertime
A block isnt going to just gain you hp ? actually I think this block is more weight then your stock so you'd slow down there, the one point of comp I have found is worth slim to none on mine.
The blocks only way 168 pounds and better ring seal with the SHP block and clinder placement is better on the dart as well and the lifter bores that are right on the money compared to most GM blocks and if using a roller cam that is criticle.

Joe Sherman posted on speeedtalk that going from a 400 block to World block was a 30 horse gain over a stock block do a search on the site or PM him.
hink is offline  
Old 06-24-2009, 03:22 PM
  #7  
lsrholder
Member
JOURNEYMAN
 
Join Date: Nov 2006
Posts: 31
Default

X2 Carl
lsrholder is offline  
Old 07-24-2009, 09:42 PM
  #8  
et7333
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Sep 2003
Posts: 259
Default

Thanks for the info
et7333 is offline  
Old 07-25-2009, 09:15 AM
  #9  
desoto30
Member
JUNIOR BUILDER
 
Join Date: Feb 2008
Location: Childers Australia
Posts: 98
Default

Yes Carl, Big Joe has stated that on several occasions that on the dyno a block change like that can & will make more power
desoto30 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -