Question about msd
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Feb 2007
Location: Sweethome, OR
Posts: 133
Question about msd
I had a vac leak and my motor was running rough. I found the problem and fixed it but know I have a bad miss. Was wondering if my msd btm went out. I was told that if the msd is bad it would shut down the whole motor and would not just shut down one cylinder. I also noticed that the passenger side headers are getting hotter that the driver's side??? Can anyone help?
Thank you
CPT.RON
Thank you
CPT.RON
#5
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
2-BLOWERS?
Originally Posted by rsrsfishslayers
Not plugs changed them wires too. I am running two hollys on two 671 blowers.
CPT.RON 8) 8)
CPT.RON 8) 8)
Later
G :?
#7
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Blowers
Ron,
Did you FIND the PROBLEM?
Also sent you a PM with a email add.to send the Picts.
Later
G 8)
ALSO,wanted to let you know?I Use a 6-BTM in my 38.If you would like to try it i would send it to you?
Did you FIND the PROBLEM?
Also sent you a PM with a email add.to send the Picts.
Later
G 8)
ALSO,wanted to let you know?I Use a 6-BTM in my 38.If you would like to try it i would send it to you?