Steering wheel switch and bracket
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Aug 2007
Location: Iowa - USA
Posts: 218
Steering wheel switch and bracket
This is probably the wrong place to ask, but I want to put the line lock switch and the tranny brake switch on a bracket mounted to the steering wheel. I can't seem to find anybody that makes the bracket. I know I saw it somewhere but, old age prevents me from remembering where. If anybody knows, I would appreciate your help.
#2
Senior Member
DYNO OPERATOR
Join Date: Apr 2008
Posts: 504
The bracket I use most often is the spokes that are on the steering wheel itself. I drill a hole in one that lines up with where I like my hand to be and use a double nut to lock it in place. If you have no flat spokes on yours, then a U-bolt holding a piece of aluminum on a spoke with a hole in it for your button may also be an economical choice that you can make to fit your steering wheel better than a generic bracket purchase?
Bruce
Bruce
#4