Results 1 to 2 of 2

Thread: port matched intake on stock 781 heads

  1. #1
    Junior Member APPRENTICE
    Join Date
    May 2003
    Posts
    20

    port matched intake on stock 781 heads

    Hello, Run a 489in chevy with unported 781 casting heads. 219/188 valves being the only Mod. Have a dart intake that I am sending in to have some work in the chamber under the carb. Would it be ok the port match the manifold. Am worried that the ports would then be bigger than the cyl head ports. Kinda like using a square port intake on it. Thanks

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2006
    Posts
    2,044
    Well if you port match the ports, they should match exactly, thats the concept of port matching.

    Its best to have them the exact same size or as close as possible, or leave the intake ports smaller, having them larger than the ports on the heads will cause turbulance and actually reduce flow.
    Goodluck, Cp
    ***IN GOD WE TRUST***


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy