Results 1 to 4 of 4

Thread: horses???

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Apr 2009
    Location
    odessa tx
    Posts
    288

    horses???

    the big block im building will be pretty weak but im wanting to get and estimate of hp

    468 keith black hypurtectic flat tops stock rods and crank edlebrock airgap intake heads ported and milled down 4 and get a good valve job done on them

    get the cam specs on next post
    pray for our soldiers our freedom and rain

  2. #2
    Senior Member EXPERT BUILDER
    Join Date
    Apr 2009
    Location
    odessa tx
    Posts
    288
    Brand: Isky Racing Cams
    Product Line: Isky Hydraulic Roller Tappet Camshafts
    Part Type: Camshafts
    Part Number: ISK-396284-294
    Cam Style: Hydraulic roller tappet
    Basic Operating RPM Range: 3,000-7,000
    Intake Duration at 050 inch Lift: 238
    Exhaust Duration at 050 inch Lift: 248
    Duration at 050 inch Lift: 238 int./248 exh.
    Advertised Intake Duration: 284
    Advertised Exhaust Duration: 294
    Advertised Duration: 284 int./294 exh.
    Intake Valve Lift with Factory Rocker Arm Ratio: 0.578 in.
    Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.608 in.
    Valve Lift with Factory Rocker Arm Ratio: 0.578 int./0.608 exh. lift
    Lobe Separation (degrees): 110
    Intake Valve Lash: 0.000 in.
    Exhaust Valve Lash: 0.000 in.
    Computer-Controlled Compatible: No
    Grind Number: RR-284/294
    Quantity: Sold individually.

    Camshaft, Hydraulic Roller Tappet, Advertised Duration 284/294, Lift .578/.608, Chevy, Big Block, Each




    with isky anti-pump-up lifters
    pray for our soldiers our freedom and rain

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    379
    Put a 871 supercharger on it with about 5-6 lbs of boost it will be around 550 to 600 Hp. as it sets my guess is 375- 400 hp depending on carburation.
    Blowninjected 540 - when is going fast, Fast enough ?????

    http://www.racingjunk.com/profile/182079

  4. #4
    Senior Member EXPERT BUILDER
    Join Date
    Apr 2009
    Location
    odessa tx
    Posts
    288
    alright i knew it wouldn;t push out much cause i aint puttin much in it but im thinkin proly a 750 or 850 demon carb
    pray for our soldiers our freedom and rain


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy