1/4 mile estimate
05-06-2009, 12:19 PM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2008
Posts: 263
1/4 mile estimate
around 425 horse motor
3000 stall and 3.73s
in a 83 longbed truck
05-06-2009, 12:54 PM
Senior Member
DYNO OPERATOR
Join Date: Feb 2009
Posts: 510
05-06-2009, 12:55 PM
Senior Member
DYNO OPERATOR
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
05-06-2009, 01:00 PM
Senior Member
EXPERT BUILDER
Join Date: Mar 2007
Location: Michigan
Posts: 379
05-06-2009, 01:41 PM
Senior Member
EXPERT BUILDER
Join Date: Aug 2007
Location: Orient, OH
Posts: 384
I agree, thats alot of weight to move. High thirteens at a shade over 90 mph would be my guess...
05-06-2009, 02:01 PM
Senior Member
RACING JUNKIE
Join Date: Aug 2007
Posts: 1,523
Estimate
13.70's @88 mph.
05-06-2009, 06:57 PM
Member
JUNIOR BUILDER
Join Date: Aug 2007
Location: Odessa Texas
Posts: 81
You will never know until you take it to the track :!: Talk is cheap, but the time slip never lies
Where did you get 425 HP from, maybe 275 :!:
05-06-2009, 10:16 PM
Senior Member
RACING JUNKIE
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Be nice. 425hp does seem high for your application. I agree, Penwell is racing the 23rd. Once you make a pass you can tell your true HP. No ifs,ands,or,butts..........My quess would be a 14.98 at 86mph.
05-07-2009, 03:06 AM
Senior Member
DYNO OPERATOR
Join Date: Feb 2009
Posts: 510
I was trying to give the benefit of the doubt. Keep us posted on what it runs. Be like PassTime on speedtv.
05-07-2009, 07:18 AM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2008
Posts: 263
im gonna run it
and i got 425 from the fact that i just got a new manifold carb and heads
maybe overestimated idk
but wel see when i go to the track on the 23rd i guess :wink:
