finally
#1
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Feb 2009
Posts: 510
finally
My car got jealous of my wife's car. We put ladder bars and coil overs on her's over the winter. 41 years of abuse on the stock leafs on my car finally took a toll. Got my ladder bars and coil overs in on saturday. Worked most of the weekend getting everything squared up. Should have it done this coming weekend. We have a race next weekend. Man, I'm getting to lod to be doing this stuff, LOL.
#7
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Feb 2009
Posts: 510
I'll try to get some. Gotta race next week and going to be busy on it to get it going. Wife said she won't go racing without me.
One of the other reasons is the car sat to low. Dragged the headers on pebbles. Needed someone to lift the front of the car if I ever needed to put a jack under it. Had to use 2 2x12's just to get it out of the trailer.
You can check hers out that we did over the winter at www.cambirdracing.com Go to the photo album section
One of the other reasons is the car sat to low. Dragged the headers on pebbles. Needed someone to lift the front of the car if I ever needed to put a jack under it. Had to use 2 2x12's just to get it out of the trailer.
You can check hers out that we did over the winter at www.cambirdracing.com Go to the photo album section
#8
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Feb 2009
Posts: 510
Here are a few I took last night. Quality isn't the best, but you asked for them, haha.
http://www.cambirdracing.com/photo_a...6053/1/138207/
Only about half way done with it.
http://www.cambirdracing.com/photo_a...6053/1/138207/
Only about half way done with it.
#10
Senior Member
DYNO OPERATOR
Thread Starter
Join Date: Feb 2009
Posts: 510
HAHAHAHA, man, I get up at 4:30 to go to work, work 10 hours and try to get to bed by 9. That and a 2 1/2 hour round trip drive everyday. doesn't give me much time to do anything. I need to have it done by next weeeknd. And I still need to change the front springs.