Rupert Lean out valve
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Rupert Lean out valve
I see many people have this "dial" like lean out valve made by Rupert using vacume.
Where can i get one? Looks like Rupert doesnt have a website.
Thanks
Keith
Where can i get one? Looks like Rupert doesnt have a website.
Thanks
Keith
#2
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Re: Rupert Lean out valve
Originally Posted by dynaguy03
I see many people have this "dial" like lean out valve made by Rupert using vacume.
Where can i get one? Looks like Rupert doesnt have a website.
Thanks
Keith
Where can i get one? Looks like Rupert doesnt have a website.
Thanks
Keith
#4
Keith,
Go to this page
http://www.mcmaster.com/#catalog/115/455/=1mnr5p
Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.
Curtis
Go to this page
http://www.mcmaster.com/#catalog/115/455/=1mnr5p
Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.
Curtis
#5
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by doorracer
Keith,
Go to this page
http://www.mcmaster.com/#catalog/115/455/=1mnr5p
Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.
Curtis
Go to this page
http://www.mcmaster.com/#catalog/115/455/=1mnr5p
Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.
Curtis
Thats it, I used it when I ran rupert stuff.
#6
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Curtis /David
Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950
THANKS AGAIN
Keith
Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950
THANKS AGAIN
Keith
#8
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by dynaguy03
Curtis /David
Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950
THANKS AGAIN
Keith
Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950
THANKS AGAIN
Keith