throttle body swap
04-13-2009, 08:37 AM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Apr 2009
Location: odessa tx
Posts: 288
throttle body swap
i just pulled my 454 out and was wondering if a bored out the stock sbc intake manifold and swapped the computers could a run the throttle body off my 454 on my 350 because the cfm difference is huge and idk if that too much fuel and idk if it will drown out my motor
04-13-2009, 11:19 AM
Senior Member
DYNO OPERATOR
Join Date: Feb 2009
Posts: 510
From what I believe, the injectors run different. I'm not a efi expert, but I have tried a v-8 throtle body on a v-6 and it didn't work. Had to swap the injectors over. Other than that it worked.
04-13-2009, 11:25 AM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Apr 2009
Location: odessa tx
Posts: 288
ok well will the injectors give the amount of fuel necessarty cause the 454 tb is huge conpared to the 350 tb
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off