Results 1 to 3 of 3

Thread: vacum pump help

  1. #1
    Junior Member APPRENTICE
    Join Date
    Mar 2004
    Posts
    18

    vacum pump help

    on alky should i run vacum pump to both valve covers to keep moisture down,,,thanks

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Nov 2004
    Location
    St. Louis, Missouri
    Posts
    664
    I have ran it both ways on alky, The main thing I try to watch is the amount of vacuum I am pulling I try ti keep it between 4-6 lbs

    When I do run a single line I always run it on the opposite side of the vacuum pump. Don't know why, I just always have done it that way. Anyone have any additional comments on that?

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    You can do it and wont hurt anything but no need if you have a tight sealed motor its going to pull plenty from one side. I pull more vacuum them mentioned above I want 6-8 at idle.
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy