bad breaks?

Old 04-05-2009, 05:41 PM
  #1  
etchison
Member
CRAFTSMAN
Thread Starter
 
Join Date: Jan 2008
Location: racine wisconsin
Posts: 50
Default bad breaks?

i got a nova with bad breaks. the pedal never gets hard. the master is under the floor it has 2 blue values on it from wilwood 4 wheel disks any thoughts?
etchison is offline  
Old 04-05-2009, 06:02 PM
  #2  
chrisr
Senior Member
MASTER BUILDER
 
Join Date: Jul 2004
Location: Elm Mott, Texas
Posts: 197
Default

Assuming this is a new set up I would bleed the master cylinder first and then the lines again. If it is not a new set up you could have a bad master cylinder or even if it is a new one that has sit for a long time it could be bypassing the fluid. I am no expert but hope this helps.
chrisr is offline  
Old 04-06-2009, 02:19 AM
  #3  
etchison
Member
CRAFTSMAN
Thread Starter
 
Join Date: Jan 2008
Location: racine wisconsin
Posts: 50
Default

i dead headed the master and it was fine. the pedal feels like a clulth pedal the fluid looks like coke very brown and it feels like there is sand in it
etchison is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -