Results 1 to 3 of 3

Thread: bad breaks?

  1. #1
    Member CRAFTSMAN
    Join Date
    Jan 2008
    Location
    racine wisconsin
    Posts
    50

    bad breaks?

    i got a nova with bad breaks. the pedal never gets hard. the master is under the floor it has 2 blue values on it from wilwood 4 wheel disks any thoughts?

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Jul 2004
    Location
    Elm Mott, Texas
    Posts
    197
    Assuming this is a new set up I would bleed the master cylinder first and then the lines again. If it is not a new set up you could have a bad master cylinder or even if it is a new one that has sit for a long time it could be bypassing the fluid. I am no expert but hope this helps.

  3. #3
    Member CRAFTSMAN
    Join Date
    Jan 2008
    Location
    racine wisconsin
    Posts
    50
    i dead headed the master and it was fine. the pedal feels like a clulth pedal the fluid looks like coke very brown and it feels like there is sand in it


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy