Results 1 to 2 of 2

Thread: Any advice on how to scale a Dirt Car

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Mar 2009
    Posts
    1

    Any advice on how to scale a Dirt Car

    Street stock, dirt car, anyone have do's and don'ts on how to scale? weights?

  2. #2
    Member MASTER JOURNEYMAN
    Join Date
    Dec 2005
    Location
    Building shelves for wally's
    Posts
    36
    On a street stock these #'s may be hard to get, a lot of times your 50.5 or so on the left and less than 50% rear but here a few #'s to shoot for.
    53% of total on the left side.
    52% of total on the rear if possible.
    Left rear around 100 lbs heavier than right rear
    Frame heights should be 1/2" higher on right front than the left front and 1.5" higher in the rear than front
    1" tire stagger across the front and 1.5" - 2" across the rear.
    Hope you can run jack bolts on the springs.

    Mark


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy