Results 1 to 1 of 1

Thread: backhalfing 94 s10 with 4-link question

  1. #1
    Junior Member APPRENTICE
    Join Date
    Jan 2008
    Location
    decatur, il.
    Posts
    14

    backhalfing 94 s10 with 4-link question

    im using s&w 10-400 pro 4 link kit. my question is on installing the backhalf. ive got the bare frame all leveled up at what i believe is ride height, ive got the frame cut off where the wheel base will be correct which is 27" forward of the old rearend center of axle tube. i was told that i should center the lower 4 link brackets (mine has 4 holes) with the center line of the main frame. the s10 frame turns upward about 6" before where i had to cut it. so that butts my crossmember up against it with only the top 1-1/4" to weld to the existing frame. i was going to gusset and plate this all in for strength. this kit is prewelded and i was going to place it with the center of the mainframe lining between the 2nd & 3rd hole on the lower link bracket. does any of this sound correct????
    thanks, brian

  2. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy