Results 1 to 5 of 5

Thread: Enderle injection pills???????

  1. #1
    Senior Member SENIOR BUILDER
    Join Date
    Oct 2005
    Location
    Wellington , New Zealand
    Posts
    122

    Enderle injection pills???????

    I need your guys thoughts again. I am just about to run up my 632 BBC that i have been building for the last 6 months. I need to know what size injector nozzles and pills to run for first start up on the dyno. I can tune it from there.

    Stats are:

    632 Big Block chev , 14-1 CR , Mild port BB3 Xtra heads. Enderle bird catcher on edelbrock victor 2R Ram. 800-800 lift 114 lobe seperation 4-7 swap cam. Let me know what else you guys need. Its in a 2800lbs super stock. 1.80 2 speed glide with 4.86 rear end.

    any help much appreciated
    "The only thing better than Cubic inches is more of them"


    GO THE ALL BLACKS!!!!!!!!

  2. #2
    Member JUNIOR BUILDER
    Join Date
    Jun 2004
    Location
    lake luzerne n.y.
    Posts
    87
    I had that close to that same combo last year.
    36 nozzles and 100 pill with a 80a-1 pump.
    If you are looking for some real good info, look at the calculator on spud millers website.
    http://www.fuelinjectionenterprises.com/

    The best suggestion I can give you is to have the system flowed. That way you can see if you need a high speed or lean out.
    Call Dave Koehler at Koehler injection,
    http://www.koehlerinjection.com/
    He does an awesome job and the service after the sale is awesome. I had my system flowed by him and I am so happy I did it. Well worth it.

  3. #3
    Senior Member SENIOR BUILDER
    Join Date
    Dec 2005
    Posts
    117

    Spuds!

    another vote for Spud Miller 8)

    great service and helpful!

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Like (demented) stated, the pill size, really depends on the pump size you're running IE 80a-1 equals about 7 GPM, a (0) pump between 3 and 4 GPM, which would require a smaller pill, use Spuds chart it will get you close.

    JMO

    Zip.

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Nov 2004
    Location
    St. Louis, Missouri
    Posts
    664
    demented
    SENIOR BUILDER


    Joined: 30 Jun 2004
    Posts: 113
    Location: lake luzerne n.y.
    Posted: Sun Mar 08, 2009 1:15 pm Post subject:

    --------------------------------------------------------------------------------

    I had that close to that same combo last year.
    36 nozzles and 100 pill with a 80a-1 pump.
    If you are looking for some real good info, look at the calculator on spud millers website.
    http://www.fuelinjectionenterprises.com/

    The best suggestion I can give you is to have the system flowed. That way you can see if you need a high speed or lean out.

    ashbros writes:

    I had a very sinilar set up and ran pretty much the same as listed above with the exception to the pill size. I ran 109's


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy