Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Dedenbear CC-3 delay box- Help!

  1. #1
    Member JUNIOR BUILDER
    Join Date
    May 2005
    Location
    Dexter, New Mexico
    Posts
    69

    Dedenbear CC-3 delay box- Help!

    Am I missing something or is there a way/need to "flash" or "reboot" this delay box? After finishing wiring the car I powered everything up, all seemed OK, same numbers and settings were still in there from last season, ran through a t-brake and shift cycle, worked OK. Next time I power it up, all the LED indicators except the t-brake are lit up, all the settings are changed, and basically the box won't respond to any inputs. I've read the help sheet a zillion times and there's no mention of anything like this. Anybody run into this? :? :? 8) JB

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Jun 2003
    Location
    Hobbs, NM
    Posts
    842
    Jim you may have a bad ground or power coming from a wrong source. Have you gotten your new car in? I was hoping it would take another year or so, so that way I might have a chance at winning a few before you get back and in the groove.....

  3. #3
    Member JUNIOR BUILDER
    Join Date
    May 2005
    Location
    Dexter, New Mexico
    Posts
    69
    Well, I guess it fixed itself. I think it was in the wrong shifter mode and a few other things, but it looks like it went back to work. So far so good. Dean, should be finishing the car up by next weekend, looking to test somewhere on the 28th or 29th, you guys doing anything? 8) JB

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Jun 2003
    Location
    Hobbs, NM
    Posts
    842
    We just finished laying 200 ft of cement gaurd rail to gaurd rail from the water box out 90ft past the starting line. We're waiting on Rusty to come out and run new wiring for the lights and computer. He was suppose to be out this week but has postponed for 2 weeks. Our first TNT is March 14, he's really cutting it close. If I were you I might miss the first TNT, until we get rubber down on the new cement. Andy's going to use VHT this year its more expensive than Lane Choice, but I think it works better. I'm probably going to test at Midland the first of March. I'll let you know when that is maybe we can meet over there. take care

  5. #5
    Member JUNIOR BUILDER
    Join Date
    May 2005
    Location
    Dexter, New Mexico
    Posts
    69
    Thanks for the update - I'll probably have to go to Midland the 28th cause I'm leaving for Tucson the following Weds. They are having a S/C race on Weds. and the NHRA divisional starts on Thurs. Just hoping for a warm track @ Midland! See you soon! 8) JB

  6. #6
    Senior Member DYNO OPERATOR
    Join Date
    Aug 2005
    Location
    Rifle Colorado
    Posts
    585
    I'll be in Tucson for the Wed race and the divisional too. Maybe I'll see ya there!* Haven't ever met anyone from here before........Gray 63 Vette roadster. SG5306

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    Jun 2003
    Location
    Hobbs, NM
    Posts
    842
    How far are you from Denver? We plan on trying to race Bandimere this year, we have family in that live in Lakewood.

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    :x I HOPE IT RAINS ON YOU GUYS!! It was 14 deg here today.

  9. #9
    Senior Member DYNO OPERATOR
    Join Date
    Aug 2005
    Location
    Rifle Colorado
    Posts
    585
    Quote Originally Posted by dparker
    How far are you from Denver? We plan on trying to race Bandimere this year, we have family in that live in Lakewood.
    About 180 miles due west of Denver on I70. We race in Denver all the time, especially in their Super Series

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    Jun 2003
    Location
    Hobbs, NM
    Posts
    842
    Quote Originally Posted by Tod74
    :x I HOPE IT RAINS ON YOU GUYS!! It was 14 deg here today.
    Hey now don't be haten.........Look how good your air density would be at 14 deg, big HP. lol :lol: :P 8)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy