How to determine rear axle ratio in a back half car??
#1
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: May 2004
Location: Loganton, Pa
Posts: 112
![Default](images/icons/icon1.gif)
I am biting the bullet and selling my brand new rear end that I had built for my 70 Buick Skylark. I am now in the midst of getting a S&W A body ladder bar back half kit and will be installing my 15x14 Buick ralley wheels on the car. It is suggested a 31x18.5x15 slick can be used but I have 14 inch wide rims and the tire suggested is 14.5. Should I get the 14.5's? I am also going to a Ford 9 inch rear with rear disc setup (stock pieces) I am running a TH 400 trans with reverse pattern manual valve body. My motor will be built to operate in the 6000 rpm range and I need to determine rear gear ratio. Any suggestions to what I should shoot for??
#2
Member
JUNIOR BUILDER
Join Date: Sep 2008
Location: DELAWARE
Posts: 93
![Default](images/icons/icon1.gif)
HEY BIG,On the site,www.hardcore50.com,they have some math formulas for working out rear end ratios and such.Maybe it might help you.FISHMANJOE
#3
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
#4
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: May 2004
Location: Loganton, Pa
Posts: 112
![Default](images/icons/icon1.gif)
Thanks for the links guys..It was really helpful. By doing some initial calculations as well as asking a friend who has a similar build to what I want,Looks like in the 4.30 range is where I need to be.