Results 1 to 6 of 6

Thread: BACK HALF PRICING

  1. #1

    BACK HALF PRICING

    WANTING TO KNOW THE FAIR PRICE TO HAVE A 69 CHEVELLE BACKHALFED TO ACCEPT A 18.5 TO 22.5 STREET TIRE. THE CAR HAS A STOCK 12 BOLT. THE CAR WILL ONLY BE DRIVEN ON THE STREET SO I WOULD THINK IT SHOULD BE ABLE TO BE DONE CHEAPER THAN AN ALL OUT RACE ONE. WOULD ALSO PAY FOR ALL PARTS AND LABOR IN CASH. I ALSO RESIDE IN FLORIDA IF ANYONE KNOWS OF A FABRICATOR. THANKS FRANK

  2. #2
    Member JUNIOR BUILDER
    Join Date
    Oct 2005
    Location
    ohio
    Posts
    94
    labor will be the same for street or race. you can shop and find econo kits that are good for street. the kit will be the only money diff. check sxw, comp enginnering, and others on line.

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    I have a A.R.T. frame and narrowed fab 9" housing, they also sell backhalf kits. They are in Fl. and i believe they have a chassis shop near them that they use. You could call them to verify this, they are really good people to deal with and some of the staff also runs cars.

    Zip.

  4. #4
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    I got a great Guy here in S.C....not to far of a drive for a Big Job like your wanting..he is VERY reasonable ,good work and their stuff works.

    i Hooked him and Cris ( Bowtie4542001) up..Cris drove up one afternoon from mid GA and they built him a set of headers for his small block chevy while he waited at waffle House. The he came to my house and we fired that little 406 beast up.

    I highly recommend these guys because of ( Price, Quality)

    if your interested let me know and i will PM you the contact Numbers..

    i seriuolsy do not think you will beat their prices for the Quality work that will be done.

    location is just 2 hours north of Atlanta.

    Brian
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  5. #5
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2003
    Location
    Douglasville Ga
    Posts
    474
    Quote Originally Posted by bjuice
    I got a great Guy here in S.C....not to far of a drive for a Big Job like your wanting..he is VERY reasonable ,good work and their stuff works.

    i Hooked him and Cris ( Bowtie4542001) up..Cris drove up one afternoon from mid GA and they built him a set of headers for his small block chevy while he waited at waffle House. The he came to my house and we fired that little 406 beast up.

    I highly recommend these guys because of ( Price, Quality)

    if your interested let me know and i will PM you the contact Numbers..

    i seriuolsy do not think you will beat their prices for the Quality work that will be done.

    location is just 2 hours north of Atlanta.

    Brian
    I vouch for this guy. Very reasonable and great quality. Couldn't find a set of headers for my old Vega and Brian recoomended him, called him up and we agreed to meet at his shop. He was there when he said he was going to be there and started on the car without any delay. Had it done in a couple of hours. He was the reason I was able to run at the Pinks All Out when it came to Commerce.

    Brian, I hope that you and your family have a Merry Christmas and a Happy New Year. Can't wait for me and the family to be able to come back your way (This time I will bring my Camaro ) Happy Holidays my friend.
    Chris

  6. #6
    Senior Member EXPERT BUILDER
    Join Date
    Jan 2005
    Posts
    336
    i would highly recomend the locker style!!!spool for me but others will disagree for street use so refer to my first sentence


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy