NARROWING REAREND????
#1
NARROWING REAREND????
A FRIEND OF MINE LIVES IN ATLANTA,GEORGIA AND IS LOOKING FOR SOMEONE TO NARROW A 9" REAREND AND SHORTEN AND RESPLINE HIS AXLES 8) 8)
GOT ANY NAMES AND ADDRESSES FOR ME?
LET ME KNOW AND I WILL CONTACT HIM
LIVELY
GOT ANY NAMES AND ADDRESSES FOR ME?
LET ME KNOW AND I WILL CONTACT HIM
LIVELY
#2
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
moser engineering has prices for shortening and respline on their
web site i think its www.moserengineering.com or just do a search
they have a neat site and still do shop work, good luck :wink:
web site i think its www.moserengineering.com or just do a search
they have a neat site and still do shop work, good luck :wink:
#3
YEAH I HAVE THEIR SITE--I WAS HOPING FOR A PLACE CLOSER TO HIM SO HE COULD JUST DROP IT OFF 8) 8) --YOU KNOW SHIPPING PRICES SUCK RIGHT NOW :twisted: :twisted: :twisted:
THANKS FOR INFO
LIVELY
THANKS FOR INFO
LIVELY
#5
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
is strange closer, they do shop work as well, they have prices
on their site also, are moser's axels that bad? i have a strange
spool w/moser 35 spl axels and these are beefy and have
taken alot of abuse, oh well :?
on their site also, are moser's axels that bad? i have a strange
spool w/moser 35 spl axels and these are beefy and have
taken alot of abuse, oh well :?
#6
Senior Member
RACING JUNKIE
Join Date: Dec 2004
Location: austin texas
Posts: 729
i have narrowed a ton of housings and there is a place not tooo far from me that will respline stock axles, but this is generally only in low hp applications. Even though i have had many stock 28 spline ford axles handle 700 hp in 3000lb applications with no problems...i dont recommend it! I have seen several issues with moser axles and they have never helped with resolving them. Every axle i order is strange, always fast, friendly and a great product! This is just my personal experience... i am sure there is plenty of opposing opinions and i dont mean to offend anyone by my post
#7
Senior Member
EXPERT BUILDER
Join Date: Jan 2007
Location: atwood,Ky
Posts: 302
knock on wood i haven't had any problems with moser stuff my car is 3200 lb & runs 6.0's in the 1/8. also don't know anyone around he that has had any.kwk what kind of problem have you had? thanks john
#8
Senior Member
DYNO OPERATOR
Join Date: Jan 2003
Location: Douglasville Ga
Posts: 474
Hey Lively,
I live here in Douglasville, about 30 mins from Atlanta and I don't know of any place close that narrows rear ends. I will look some more and if I found someone, I will let you know.
Chris
I live here in Douglasville, about 30 mins from Atlanta and I don't know of any place close that narrows rear ends. I will look some more and if I found someone, I will let you know.
Chris