Results 1 to 8 of 8

Thread: NARROWING REAREND????

  1. #1
    Senior Member RACING JUNKIE lively's Avatar
    Join Date
    Nov 2004
    Location
    ILLINOIS
    Posts
    2,191

    NARROWING REAREND????

    A FRIEND OF MINE LIVES IN ATLANTA,GEORGIA AND IS LOOKING FOR SOMEONE TO NARROW A 9" REAREND AND SHORTEN AND RESPLINE HIS AXLES 8) 8)
    GOT ANY NAMES AND ADDRESSES FOR ME?
    LET ME KNOW AND I WILL CONTACT HIM
    LIVELY

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    moser engineering has prices for shortening and respline on their
    web site i think its www.moserengineering.com or just do a search
    they have a neat site and still do shop work, good luck :wink:

  3. #3
    Senior Member RACING JUNKIE lively's Avatar
    Join Date
    Nov 2004
    Location
    ILLINOIS
    Posts
    2,191
    YEAH I HAVE THEIR SITE--I WAS HOPING FOR A PLACE CLOSER TO HIM SO HE COULD JUST DROP IT OFF 8) 8) --YOU KNOW SHIPPING PRICES SUCK RIGHT NOW :twisted: :twisted: :twisted:
    THANKS FOR INFO
    LIVELY

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Dec 2004
    Location
    austin texas
    Posts
    729
    I would do the axle if you lived closer!!! The only place i know is in dallas texas that resplines axle near me. If you buy new, go with strange not moser.

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    is strange closer, they do shop work as well, they have prices
    on their site also, are moser's axels that bad? i have a strange
    spool w/moser 35 spl axels and these are beefy and have
    taken alot of abuse, oh well :?

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Dec 2004
    Location
    austin texas
    Posts
    729
    i have narrowed a ton of housings and there is a place not tooo far from me that will respline stock axles, but this is generally only in low hp applications. Even though i have had many stock 28 spline ford axles handle 700 hp in 3000lb applications with no problems...i dont recommend it! I have seen several issues with moser axles and they have never helped with resolving them. Every axle i order is strange, always fast, friendly and a great product! This is just my personal experience... i am sure there is plenty of opposing opinions and i dont mean to offend anyone by my post

  7. #7
    Senior Member EXPERT BUILDER
    Join Date
    Jan 2007
    Location
    atwood,Ky
    Posts
    302
    knock on wood i haven't had any problems with moser stuff my car is 3200 lb & runs 6.0's in the 1/8. also don't know anyone around he that has had any.kwk what kind of problem have you had? thanks john

  8. #8
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2003
    Location
    Douglasville Ga
    Posts
    474
    Hey Lively,
    I live here in Douglasville, about 30 mins from Atlanta and I don't know of any place close that narrows rear ends. I will look some more and if I found someone, I will let you know.

    Chris


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy