Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: CNCRacingHeads

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237

    CNCRacingHeads

    Has anyone heard anything good or bad about this company.They seem a little low on price and just wondering about the quality.The ad# is 1369519.I was suppose to send them out to RFD but things happened and now I'm ready.Thanks

  2. #2
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    Can anyone help me on this? I'm sure someone has dealt with them. I heard he has done some pro stock cars. Please let me know anything. Thanks

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    MAYBE ASK OVER ON SPEEDTALK....a lot of engine guys over there. just a thought.

  4. #4
    Administrator RACING JUNKIE
    Join Date
    Mar 2004
    Location
    Maine,USA
    Posts
    1,208
    http://www.racingjunk.com/post/13695...G-520-CFM.html

    I've never heard of this outfit,but thats not sayin they aren't a legit company either.

    I got a question,if you was going to use RFD why are you not using RFD (Curtis) now? I am sure Curtis has alot of experiance with these heads you got.

    Also why not support the people that support us here at RJ? Curtis is here in the forum ,in the engine section,and we all know he is for real,why go else where?
    I am sure he has done work here for quite a few folks,and have never heard a bad word about Curtis,(RFD)
    There Is 1 Thing Better Than Cubic Inches,,,More Of Them

  5. #5
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    I spoke with him the other day and he said he had some of RFD's heads in there that he worked on and he is also about $600 cheaper.He also does the port work for Steve Schmidt. He also pays the shipping back to the customer one way which helps out.

  6. #6
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    I did some research on this company and found out he does excellent work. I spoke with Steve Schmidt Racing Engines and they said he does the "Pro Stock Heads" for them. I also found out that he does the head work for Pro Stock Driver "Greg Stanfield". If he is good enough for them, then he is definitely getting my Brodix Heads. His name is Ted and he is a super nice guy. If you are looking for quality work for a good price you need to give him a call. The name of his company is CNCRacingHeads and his ph# is 708-755-2000.

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    935
    These would not be the same heads you asked me about shipping up here to my guy in Ohio, are they?

  8. #8
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    shawnp, your guy already has the heads but we decided to get them cnc ported to save on all the labor that needs to be done. Your guy is definitely building the motor. I have been in touch with Murray and he is taking care of everything on that end. I appreciate your help. Thanks

  9. #9
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    Quote Originally Posted by topsportsman1
    http://www.racingjunk.com/post/1369519/DART-BIG-CHIEF-HEADS-CNC-PORTING-520-CFM.html

    I've never heard of this outfit,but thats not sayin they aren't a legit company either.

    I got a question,if you was going to use RFD why are you not using RFD (Curtis) now? I am sure Curtis has alot of experiance with these heads you got.

    Also why not support the people that support us here at RJ? Curtis is here in the forum ,in the engine section,and we all know he is for real,why go else where?
    I am sure he has done work here for quite a few folks,and have never heard a bad word about Curtis,(RFD)
    Ok Tom, It looks like the guy at www.cncrh.com also known as (TK Racing) did a number on my heads. :cry: :cry: I spoke with Curtis and as soon as I get this straightened up I will be getting a set done by him. I should have used Curtis in the first place. Please don't bash me, it was a very expensive lesson learned.

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Quote Originally Posted by shawnp
    These would not be the same heads you asked me about shipping up here to my guy in Ohio, are they?
    Pink is this cnc head place the sameone shooter had all the issues with, that was a big topic on drr ? he was in indiana ?
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy