Results 1 to 8 of 8

Thread: chrome Moly Drive shaft

  1. #1
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239

    chrome Moly Drive shaft

    just had me another Moly drive shaft built with 1350 u-joints,billet slip yoke and a Billet Pinion Yoke...i was very pleased with their work.

    http://www.carolinadriveline.com/

    reason i am sharing this with you is that i got the Billet Pinion yoke (28 spline/1350) for $130.00...everywhere else i priced them was 30 to 50 higher then this.

    he also builds the moly shafts with 1350 u joints for $239...this is balanced.


    Just thought i would share maybe to save someone some Bucks !

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    That's a good price BJ, does that include solid 1350 u'joints or the one's with grease fitting :?:
    I gonna need 2 of them real soon.

    Zip.

  3. #3
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    No zip they are solid. spicers to be exact. i am very pleased with this shaft.
    i got an extra Billet slip yoke (Mark Williams) if ya needing one..

    let me know..

    Brian
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  4. #4
    WOW,that is a great price.I had napa build a shaft 38" long with thin tubing and small u-joints that cost over 200.00. I need a shaft now and will call them,thanks for the info.

  5. #5
    Senior Member RACING JUNKIE lively's Avatar
    Join Date
    Nov 2004
    Location
    ILLINOIS
    Posts
    2,191
    BRIAN---WILL THEY BUILD THEM FOR A [SHHHH]-[FORD]???
    LIVELY

  6. #6
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    You Bet Lively....

    they will make them bad Boys for about anything...i thought i heard Tom mention something about 'Space Shuttle"....Now you know i am Chittin ya...lol

    when ya get ready ..give him a Buzz..i think you will be pleased
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  7. #7
    Junior Member SHOW GUEST
    Join Date
    Feb 2007
    Posts
    4
    What is the lenght, diameter and weight of your moly shaft? I'm in the market for a new one and would like to shed a few pounds. Thanks JKaz

  8. #8
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    34 inches from center yoke to center yoke and its 3 inch diameter..i don't know on the drive shaft weight only..i am sure they could tell you real quick with a phone call.
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy