My 67 Chevelle
10-18-2008, 10:15 AM
Member
MASTER JOURNEYMAN
Thread Starter
Join Date: May 2004
Posts: 43
My 67 Chevelle
1967 Chevelle drag car
it has a 477 cubic inch steel headed bbc backed by a 400th tranny.It has a Dana 12 bolt with a 4.10 gear and a 30x12.50 Hoosier.It's a blast to drive.Cae weighs 3510 with me in it.
best times:60 ft-1.35
e.t.-6.26 in the 1/8th mile @ 108 mph
10-18-2008, 10:57 AM
Senior Member
RACING JUNKIE
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
10-18-2008, 04:13 PM
Member
JUNIOR BUILDER
Join Date: Sep 2003
Location: las vegas
Posts: 75
Sweeeeeeeeeeeeeeeeeeeeeeeeeet LOOKING CAR
10-18-2008, 05:24 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Wow...and only a 4.10 gear at 3500 lbs . . Impressive.
10-18-2008, 05:26 PM
Senior Member
DYNO OPERATOR
Join Date: Jan 2003
Location: Douglasville Ga
Posts: 474
That is pretty impressive.
Sweet looking car.
Chris
10-18-2008, 06:23 PM
Member
MASTER JOURNEYMAN
Thread Starter
Join Date: May 2004
Posts: 43
Thanks guys, gotta love them Vegas though...I tried a lower gear but made it harder to drive and it spun a lot..It was fun 60 footing the back tires a couple times though.
10-19-2008, 03:53 PM
Senior Member
DYNO OPERATOR
Join Date: Nov 2006
Location: NC
Posts: 557
Nice launch!!!! Kool car !D.R.
10-19-2008, 04:08 PM
Senior Member
MASTER BUILDER
Join Date: Jan 2006
Posts: 237
Good looking car,is it a hard top or sedan? I'm building a 68 because thats what the girlfriend likes.My favorite is 66-67.I will build one when this one is finished.
10-20-2008, 06:57 AM
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
SWEET RIDE!!!!!!!!!!!!!!!!!!!!! 8)
10-20-2008, 03:44 PM
Member
MASTER JOURNEYMAN
Thread Starter
Join Date: May 2004
Posts: 43
It's an ole grocery gettin sedan but it has came a long way huh??? My dad's first race car was a 66 but couldn't find one so that's when I found this one..