neal chance conv.
#1
Member
JOURNEYMAN
Thread Starter
Join Date: Oct 2007
Location: Slidell Louisiana
Posts: 34
neal chance conv.
Hey guys
has any one used these Neal conv? do you change the stator it self, and the shims,to change the rpm of the stall or is the stator the same and you just change the shims. Have called & e-mail the comp. with no resp.
Thanks Dale
has any one used these Neal conv? do you change the stator it self, and the shims,to change the rpm of the stall or is the stator the same and you just change the shims. Have called & e-mail the comp. with no resp.
Thanks Dale
#3
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Probably this thread was not seen by anyone who has experience with them...perhaps try posting it in the transmision section rather than general topics?? I guarentee if someone on here could help they would. ..the right guys just didn't read it, in my opinion. good luck
#4
Member
JOURNEYMAN
Thread Starter
Join Date: Oct 2007
Location: Slidell Louisiana
Posts: 34
Think we put this one in the rong spot :shock: Were just picken... fuigured we would get a rise out of someone....Your right if the right one saw it they would say something for sure!!! you and the rest have always helped me...
thanks a BUNCH..
company did call back,but couldnt get much out of them
thanks a BUNCH..
company did call back,but couldnt get much out of them