Results 1 to 3 of 3

Thread: 1.6 rockers on a bbc

  1. #1

    1.6 rockers on a bbc

    I have a question on running 1.6 stainless rockers on the exhaust side on my bbc. Will the rockers just bolt on and clear my 1.6 springs. The reason I ask is that I have 2 valves that just touch the pistons now using 1.8 rockers and I don't think I will lose that much hp by swapping to the lower ratio on just the exhaust. Thanks for any help Swany

  2. #2
    Senior Member SENIOR BUILDER
    Join Date
    Oct 2005
    Location
    Wellington , New Zealand
    Posts
    122
    Cam info?? Heads?? More engine info??

  3. #3

    valve to piston clearance

    I would suggest that you take a little time and do a valve to piston clearance check. If you have two touching, you have more very close or touching. It doesn't matter what cam, lifters or pistons you are running. You don't have enough clearance. A little time spent now is a lot less than the time and money you will spend fixing a valve head that went through a piston.

    speaking from experience,

    gyrogearloose

  4. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy