Page 1 of 4 123 ... LastLast
Results 1 to 10 of 32

Thread: MILODON OIL PUMP.....what a joke.

  1. #1
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143

    MILODON OIL PUMP.....what a joke.

    I just got my new MILODON oil pump from Jegs...costs twice what the melling does...I have a new Melling but everyone has me afraid of it . SO I ordered the Milodon cause they say they have billet gears and yada yada...well I got it today and open the box and inside I find a MELLING M77HV pump exactly like the 34 dollar POS that I already have...SAME CASTING NUMBERS SAME EVERYTHING...SAME FREAKIN' PUMP. :evil: ..EXCEPT IT was 87 dollars after shipping. I called Jegs who told me Melling makes the pumps for Milodon....Well DUH!!! I can see that Mr. Wizard :roll: ....so they give me Milodon's number and they tell me that they bought a "Couple Thousand" of them from Melling 5 or 6 years ago when they were "GOOD" and that they have billet gears and have been "GONE THROUGH AND OPENED UP AND EVERYTHING LIKE THAT" those were his words. :roll: I said "PFFFT."
    This pump is going back so basically I just gave jegs about 20 bucks for shipping for nothing...what a crock. Is there any pump worth a hoot besides the 400 dollar gerators? If I wanted a M77HV I would buy one for 34 bucks not 72 plus shipping.

  2. #2

    pump

    check out the cvr pump they sell a 4340 pump and a billet pump and they claim that they are billet gears

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143

    Re: pump

    Quote Originally Posted by promod45
    check out the cvr pump they sell a 4340 pump and a billet pump and they claim that they are billet gears
    I can't find one. I can find the billet aluminum one but not the steel one. I emailed them and they said I could get one through competition products but all they list is the aluminum one

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    i bought the CVR billet aluminum pump w/steel gears for $300.
    you can give them a call their very helpful 1.800233.0199
    just ordered a screen kit and stretch bolt gauge, good luck :wink:

  5. #5
    Senior Member RACING JUNKIE jmarksdragster's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    635

    Re: pump

    Quote Originally Posted by Tod74
    Quote Originally Posted by promod45
    check out the cvr pump they sell a 4340 pump and a billet pump and they claim that they are billet gears
    I can't find one. I can find the billet aluminum one but not the steel one. I emailed them and they said I could get one through competition products but all they list is the aluminum one
    They are Billet Aluminum, NOT steel. The gears are billet steel. Competition Products is the place and although they don't list them, they have pickups for different depth pans.
    Mark Whitener
    http://racingfuelsystems.myfunforum.org
    __________

    Good work isn't cheap, and cheap work can't be good.

  6. #6

    pump

    i have there catolge and they do have a 4340 pump you just need to call competion products and they can tell you, there pumps are very reasonable ..todd

  7. #7

    pump

    jmarksdragster is right they do sell billet aluminum pumps and they look really nice but they also sell the pumps with 4340 steel bodies and billet gears ..good luck

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Mar 2003
    Location
    Fountain,MICHIGAN
    Posts
    856

    Re: pump

    Quote Originally Posted by promod45
    i have there catolge and they do have a 4340 pump you just need to call competion products and they can tell you, there pumps are very reasonable ..todd
    Todd,
    I have the Cataloge in My Hands,on Page 145 CVR Pro-Lube Oil Pumps,t6-6061 Billet Alu.Housing,with Steel Billet Gears!
    Maybe your Book has 4340 Pumps???Mine DONT!
    Later
    G 8)

  9. #9

    pumps

    marksdragster, im looking at the cvr catolge for 2008 and on page 25 of cvr they show a pic of a steel body pump made of 4340 part no op455 for a small block and they have billet gears, but the book i have only goes to page 27, that is what i have in my book but i could be wrong

  10. #10
    Senior Member DYNO OPERATOR
    Join Date
    Feb 2006
    Location
    VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
    Posts
    540
    Or you could order a Titan through me for a litle more than the CVR Spur Gear Pump in the Billet Aluminum housing and get the real oil pump that is made to order to fit your pan depth and set to the bench pressure you ask for and is fully tested prior to shipping and is oily and wrapped in clear paper to keep the oil from leaking out. That is proof it is bench tested. Each one is tested. You get the pickup depth for what you need.

    Only problem is some pans the Titan Pump will not fit because of the way the pan is made. Moroso on purpose tries to keep their pans from fitting but Titan has made slight changes to shape and can fit some of them.

    Can not post the prices. Can respond back by email.
    edvancedengines@hotmail.com

    Ed
    " Let all things that hath breath, praise the Lord. Praise Ye the Lord" Psalms 150 vs 6.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy