Cold fusion nitrose jets

Old 05-21-2008, 10:34 AM
  #1  
Pdmracing
Member
CRAFTSMAN
Thread Starter
 
Join Date: Oct 2007
Posts: 53
Default Cold fusion nitrose jets

I bought a car with a setup allready on, Are these jets the same as NOS? thanks
Pdmracing is offline  
Old 05-21-2008, 02:51 PM
  #2  
v8Fiero
Senior Member
MASTER BUILDER
 
Join Date: Nov 2007
Location: Wisconsin cheesehead!!
Posts: 213
Default

a flare jet is a flare jet, not much difference exept some are stainless steel, and the other cheaper ones are brass.
v8Fiero is offline  
Old 05-21-2008, 03:05 PM
  #3  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
Default

er, not exactly. The degree of flare is different and not all jets are interchangeable as a result.
mytmouz is offline  
Old 05-21-2008, 03:07 PM
  #4  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
Default

Here is a link...

http://s156.photobucket.com/albums/t...Picture006.jpg
mytmouz is offline  
Old 05-21-2008, 04:43 PM
  #5  
demented
Member
JUNIOR BUILDER
 
Join Date: Jun 2004
Location: lake luzerne n.y.
Posts: 87
Default

Originally Posted by v8Fiero
a flare jet is a flare jet, not much difference exept some are stainless steel, and the other cheaper ones are brass.
Not true at all. Most jets that are out there are made in different ways. Some drilled some cnc'ed, and some are flowed after they are made. The brass jets are the most inconsistent jets you can buy( I only know of one company that makes excellent brass jets, not well known). Stainless steel are becoming the norm and most are cnc'ed so you do end up with more consistant jetting which is necessary with a fogger system. The flowed jets are the best for getting the most consistant cylinder to cylinder equalization of nitrous and fuel with a fogger system. The flowed jets are really designed for the guy running on the edge of a tune.
demented is offline  
Old 05-22-2008, 07:20 AM
  #6  
Pdmracing
Member
CRAFTSMAN
Thread Starter
 
Join Date: Oct 2007
Posts: 53
Default

I had bought som stainelss steel nos jets to replace the brass & they look a little different on the base , like they have a litlle bevel where it meets the stem, the brass jet looks like a mushroom, the bas to the stem looks is a 90 degree angle, where the Stainless one tapers a little, if it fits is it ok?
Thanks for the replys
Pdmracing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -