Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: nye's automotive

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237

    nye's automotive

    Has anyone had a motor built by these guys and was not happy with it? I'm thinking about getting a motor built and was looking at dynoflo and ohio crankshaft also. Can anybody help me pick the right one to go with? Thanks

  2. #2
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    Nye's out of the three..

    where do you live ?..if you were considering going some distance for your motor i like PAR Racing Engines out of S.C. ( Scott Duggins is the onwer)..864-578-5622...His 565's with oval port heads are makng right at the 1050hp range..and they running these things round,after round after round..with no problems and minimum maintenance other than the preventive norm....

    just my 2 cents.
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  3. #3
    Senior Member RACING JUNKIE jmarksdragster's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    635
    Reher Morrison.
    Mark Whitener
    http://racingfuelsystems.myfunforum.org
    __________

    Good work isn't cheap, and cheap work can't be good.

  4. #4
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    I live in Louisiana, I'm looking to build a big chief motor, I already have a square port tunnel ram with two 1150's. The intake is for 18 degree heads so I plan on going with brodix pb1802 with titanium intake valves and the intake is already drilled for a fogger system. This will be in a drag radial car weighing about 3400 lbs.

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    I have a Nye's 582 in my car and know Pat (one of the owners) personally he is a heck of a nice guy and wont do you wrong ! DO NOT buy from Dynoflo. Nyes stuff works good and prices are great ! Machine work is top notch !
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    Read this thread and you won't even think about dyno-blow

    http://forums.racingjunk.com/viewtop...hlight=dynoflo

  7. #7
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    Thanks, I spoke with Pat the other day but just wanted to hear what everyone had to say. He seemed to be a honest and helpful guy but it never hurts to be safe. I guess he will be the one doing my motor. Thanks for all the input.

  8. #8
    Senior Member DYNO OPERATOR
    Join Date
    Aug 2005
    Location
    Rifle Colorado
    Posts
    585
    ReherMorrison....

  9. #9
    Senior Member MASTER BUILDER
    Join Date
    Jan 2006
    Posts
    237
    reher morrison told me they won't make anything larger than 620 inches

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Posts
    4,143
    Quote Originally Posted by michael1
    reher morrison told me they won't make anything larger than 620 inches
    :shock:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy