Results 1 to 8 of 8

Thread: THANKS ED!

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Sep 2003
    Posts
    259

    THANKS ED!

    [quote="edvancedengines"]With the best quality Ti-17 Professional Grade Retainrs the retainer OD is smaller than the spring OD. There is no reason for the retainer to be as large or larger than the spring.} Thanks Ed-I replaced my Manley Titanium retainers with a set of Xceldyne Titanium retainers that fit snug in the springs and are smaller then the spring OD,chambered the springs,clearanced the rockers to remove the rubbing marks and now the rockers have NO marks on them after several 1/4 mile passes.


  2. #2
    Senior Member EXPERT BUILDER
    Join Date
    Jun 2005
    Location
    potash country
    Posts
    262
    Wheels up and haul'in,nice

    Ok......now you have our attention........give power details and times on your combo!
    If a 5 lb hammer can't fix it,it must be electrical
    Keep the shiney side up! 8)
    http://www.racingjunk.com/profile/85221

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Sep 2003
    Posts
    259
    nofear69: My camaro weighs 3100,383,13-1,.558 int,.550 ex,260,266@.050 comp flat tappet,stock 215 Dart Iron Eagle Platinums,Manley 6 inch rods,Super Victor port matched,750 APD Alky Carb,Powerglide Trans-Car ran 6.57@104 at the track in the pic,1/8 MILE

  4. #4
    Senior Member EXPERT BUILDER
    Join Date
    Jun 2005
    Location
    potash country
    Posts
    262
    Perfect I love the nothing over kill combos.
    Small cubes,carb,cam and heads but good compression with alcohol. This should be a bullet proof low maintenace engine,everything works together. You did your home work,cool 8) and the small tires give it that sleeper look. Loose a little weight and the 5's aren't to far away. My hats off to you,great 67' Camaro
    If a 5 lb hammer can't fix it,it must be electrical
    Keep the shiney side up! 8)
    http://www.racingjunk.com/profile/85221

  5. #5
    Senior Member EXPERT BUILDER
    Join Date
    Sep 2003
    Posts
    259
    Thanks,it's a 68 with a 67 grille.I couldn't find a 68 grille at the time.The car is all steel and the original windows.

  6. #6
    Senior Member DYNO OPERATOR
    Join Date
    Feb 2006
    Location
    VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
    Posts
    540
    Thank you for the acknowledgement. Appreciate it.

    Ed
    " Let all things that hath breath, praise the Lord. Praise Ye the Lord" Psalms 150 vs 6.

  7. #7
    Senior Member EXPERT BUILDER
    Join Date
    Sep 2003
    Posts
    259
    Your welcome and thank you for the GREAT ADVICE!

  8. #8
    Senior Member EXPERT BUILDER
    Join Date
    Sep 2003
    Posts
    259
    I finally ran the camaro at Bakersfield this weekend.BEST E.T. TO DATE.....10.32 AT 130.30 M.P.H.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy