gimmie an estimation

Old 03-11-2008, 04:57 PM
  #1  
kw89425
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2007
Location: waynesburg, ky
Posts: 217
Default gimmie an estimation

i have a nova ladder bar car weighs around 2800 4:88's 31x14 tires. a pump gas 496 eagle rot assembly je pistons dart 320's 284.294 726.714 solid roller strip dominator intake 950 hp holly glide with 5500 stall and break. what might i expect to run 1/8 1/4? thanks
kw89425 is offline  
Old 03-11-2008, 05:24 PM
  #2  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Default

1/8 - 6.90's to 7.0's




no charts or formulas used here.


let us know what it runs
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 03-11-2008, 05:35 PM
  #3  
ImBack
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Shelbyville Indiana
Posts: 139
Default

my 3000lb.,590 lift oval port 468 ran 6.60's. I say 6.40's
ImBack is offline  
Old 03-11-2008, 05:41 PM
  #4  
shawnp
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Ohio
Posts: 936
Default

Aluminum headed 477 on alky 9.90's 1/4 mile.

shawnp is offline  
Old 03-11-2008, 05:41 PM
  #5  
kw89425
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2007
Location: waynesburg, ky
Posts: 217
Default

i would be very happy if it would go mid 6's but it is pump gas motor
kw89425 is offline  
Old 03-11-2008, 06:02 PM
  #6  
ImBack
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Shelbyville Indiana
Posts: 139
Default

But its light,has good heads and cam combo.A friend has a 10.5 comp.468 with 781 ovalports unported,714 lift solid cam made 616hp.and 588 lb.tq on gas
ImBack is offline  
Old 03-11-2008, 06:18 PM
  #7  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Default

Originally Posted by ImBack
my 3000lb.,590 lift oval port 468 ran 6.60's. I say 6.40's
pump gas motor ? :shock:
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 03-11-2008, 06:44 PM
  #8  
ImBack
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Shelbyville Indiana
Posts: 139
Default

no it was low comp. but i never tried it.You can get good power from a pump gas motor.
ImBack is offline  
Old 03-11-2008, 06:52 PM
  #9  
kw89425
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2007
Location: waynesburg, ky
Posts: 217
Default

yeah bjuice i cant afford race gas i almost cant afford 92. my ride does pull street duty not alot but some. what ever it runs i can say and mean the wife drove it to get groceries thats not gonna happen but it could..lol
kw89425 is offline  
Old 03-12-2008, 04:01 AM
  #10  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Default

Originally Posted by kw89425
yeah bjuice i cant afford race gas i almost cant afford 92. my ride does pull street duty not alot but some. what ever it runs i can say and mean the wife drove it to get groceries thats not gonna happen but it could..lol
thats Cool..i wish you luck..

but just to clear somthing up..normally when you hear someone say or use the term pump gas..its understood the motor is Low compression.

let us know what you run...if you run mid 6's and drive this on the street ..then you have some good stuff going on...

and i hope you do.


Brian
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -