Results 1 to 3 of 3

Thread: how to seat liners in an aluminum bbc merlin x block

  1. #1

    how to seat liners in an aluminum bbc merlin x block

    just had a friends new brodix aluminum bbc block blow the cometic head gaskets in a blown 598 boat application only after a few runs. The liners were found to be dropped a few thousands after tear down.

    What is a reliable way to insure the liners are seated before decking and assembling a new aluminum block?

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Location
    Montvale, VA
    Posts
    1,431
    I thought you were supposed to machine a "step" in the existing cylinder wall material to press the sleeve up against,to prevent it from walking :shock:
    "The problem with quotes on the Internet is that you cannot confirm their validity"- Abraham Lincoln

  3. #3
    Senior Member MASTER BUILDER
    Join Date
    Nov 2005
    Location
    Mobile,Al.
    Posts
    127
    Some of the boat racers i know,are sleeving the 2.5 offshore mercs.They use the green locktight to seat the liners.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy