Rear End Size for 72 Nova
#1
Member
JUNIOR BUILDER
Thread Starter
Join Date: Aug 2007
Location: Bedford, Ohio
Posts: 86
Rear End Size for 72 Nova
I need to get a posi unit for my 72 Nova, but I don't want to have to change the case. It has 10 bolt on the rear pan, is that an 8.5 or 7.5? And can I get an auburn unit kit for it?
Help?
Help?
#3
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
my nova was a 10 bolt 8.5" ring went with auburn pro-series
28 spline posi, takes all my 383 will give, with kick a$$ axels
from www.tomsdiferentials.com
28 spline posi, takes all my 383 will give, with kick a$$ axels
from www.tomsdiferentials.com
#4
Member
JUNIOR BUILDER
Thread Starter
Join Date: Aug 2007
Location: Bedford, Ohio
Posts: 86
That's not a good website address, but thanks. There is a crate rearend place on the web I'll search for (currie I think).
Hoping that I can use the case for a 8.5 posi unit. How can I tell?
Hoping that I can use the case for a 8.5 posi unit. How can I tell?
#5
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
http://www.tomsdifferentials.com/
http://www.tomsdifferentials.com/tomp.htm
he had the right address he just mispelled it. Happens to everyone now and then.
http://www.tomsdifferentials.com/tomp.htm
he had the right address he just mispelled it. Happens to everyone now and then.
#6
Senior Member
RACING JUNKIE
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
thanx for the correction tod, i will blame the computer ha.
tom's has all you need to change a 10 bolt in to a heavy
monster. the good rebuildable 10 bolts have ears on the bottom,
if they don't go with a 12 bolt if you have to replace it, i am
going to have my 10 bolt for sale in a month, going with
a shorten rear with a spool the 10 bolt has 3:73 US gears
good luck :wink:
tom's has all you need to change a 10 bolt in to a heavy
monster. the good rebuildable 10 bolts have ears on the bottom,
if they don't go with a 12 bolt if you have to replace it, i am
going to have my 10 bolt for sale in a month, going with
a shorten rear with a spool the 10 bolt has 3:73 US gears
good luck :wink: