Results 1 to 3 of 3

Thread: SCE ICS TITAN HEAD GASKETS

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Dec 2005
    Location
    berea,ky
    Posts
    184

    SCE ICS TITAN HEAD GASKETS

    Has anybody used these gaskets for BBC.These are the copper gaskets with the built in o-ring and the silicone beads on the water and oil passages.Just wandering if these work or not and if they require a slick finish on the block and heads like the MLS gaskets require.Thanks

  2. #2
    Senior Member SENIOR BUILDER
    Join Date
    Feb 2005
    Posts
    121
    I used them on a SBC,I had no luck with them tried 2 sets and had to send them back to sce,and then I just oringed my block and used the standard copper head gasket and now I have no problems at all, If I were you and didn't want to o-ring your block use cometic head gaskets and they require a smooth head and block surface.

  3. #3
    Member JUNIOR BUILDER
    Join Date
    Sep 2005
    Location
    East Texas
    Posts
    86
    I've got them on my 496. Fresh motor, so can't give much info yet. My last set of MLS's burned through between cyl. 4 & 6, cutting a gouge half as thick as my little finger into my iron heads. Have since upped the compression, so I wanted more protection for my new high dollar aluminum heads. I really like their design.

    -Tanner

    P.S. I believe Ken is using them also, so you might PM him about them. You will have to retorque these gaskets after first couple of heat cycles. Mine didn't back off, but others have had water leaks if they didn't retorque, as advised by the company.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy