Results 1 to 4 of 4

Thread: How do i remove the lower a arms in a 83 camaro

  1. #1

    How do i remove the lower a arms in a 83 camaro

    I think i want to change my motor mounts and the best way i see of doing this is to remove the lower a arms and go through the spring pocket to get to the back bolts on the mounts, also i want to change the bushings to the hodchkis ones, i guess i was wondering if i could do this in my garage at home or do i need some special set up, worried about the spring tension. thx to all

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    i used spring tension supressors and you can also use a floor
    jack after popping the tierod out, and you will need a press
    to get the new bushings in the arms, i had a brake shop do the
    bushing for 10 bucks for upper and lower, polyurathane with
    a little grease, carefule with the springs, gearheads have
    been killed from the springs, good luck :?

  3. #3
    well i got the springs out and i am still alive lol, what do you guys think about dropping the k member out while i have it tore down this far, and maybe even putting a spohn tubular k member in it what do ya think

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    upgrading for more torque is always a good thing :lol:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy