Results 1 to 3 of 3

Thread: WHAT HEAD GASKETS

  1. #1

    WHAT HEAD GASKETS

    On a 15.1 BBC would the regular Fel-Pro head gaskets be ok or would i need the Fel-Pro MLS gaskets.The bore size is 4.560 and the regular Fel-Pro gasket # is 1057.This is a N/A motor.Thanks

  2. #2
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    i have a 14:1 Cr motor and i run the Fel-Pro- Cometic head gaskets with head studs..the study i did on them before i dropped $200 on a set of head gaskets came out good..there were claims of turbo,Nos,Blower guys running these gaskets with high cylinder pressure and not squeeing one out..so i went with them..happy so far....

    i would stud the heads if you haven't already for more squeeze.

    My take on it..

    Brian
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  3. #3
    Senior Member RACING JUNKIE fla1976's Avatar
    Join Date
    Aug 2007
    Posts
    1,527

    Head gasket

    I would highly recommend the Cometic gaskets. A local engine builder of super gas engines got me to use them after a head gasket blowout and I never had the problem again. I also went with a head stud kit. A few extra dollars but well worth the peace of mind.

  4. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy