Results 1 to 8 of 8

Thread: What starter to buy

  1. #1

    What starter to buy

    What kind of starter would you buy for a 15.1 632ci.I have the small CVR starter that has been a great starter but it doen't have the power to turn this engine fast enough and start it.Just wondering what everyone else is using on the big cube motors.

  2. #2
    Member JUNIOR BUILDER
    Join Date
    May 2005
    Location
    Dexter, New Mexico
    Posts
    69

    starter

    You'll get alot of opinions on this, but I'm sold on the GPE starters. Really good people to work with too. 8) JB

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    I'm not partical to them, just because i sell them and i donot sell on RJ, but the ProComp PC2106 is a 3HP with 4.1 gear reduction and i've sold over 30 of them and have never had one returned in 4 yrs.(i won't sell you one here on RJ), but you can get one from their website and it will cost you less than any other starter listed that i know of.

    JMO

    Zip.

  4. #4
    yes a lot of opinons, i like the #9400 powermaster from summit, i've gone thru the starter game and this works even beter than there more expensive 9400 that i sent back. if you dont already have the 16 volt there is another step again. one you have the 16 v you'll never go back. i have great luck with the 16-12 volt v-power from jegs, 565 ci 15.1

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Mar 2003
    Location
    Ohio
    Posts
    935
    I would check into the CSR 24 Volt set up. Very nice, but is a little pricey. We have run th CSR Platinum series stuff with no problems.

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Location
    Belleville, IL
    Posts
    658
    http://store.summitracing.com/partde...5&autoview=sku

    I've been running the 2.4 HP CSR for almost 8 years now without any issues at all.

    This was on a 505 with 11.5:1 static compression, plus the drag of a 10-71 blower on top. That starter on 12V provides plenty of cranking speed with a 168T flexplate to spin the motor at a speed that the mag will fire.

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    http://www.jegs.com/webapp/wcs/store...10002_35690_-1

    Tilton Super Starter, I've had 2 of these for years one for the trailer and one for the car. Right now I have it on a 582 with 14:1 compression.

    Another tip for big inch motors, a start retard is a nice thing to use.

  8. #8
    Junior Member SHOW GUEST
    Join Date
    Dec 2003
    Location
    New Hampshire
    Posts
    8
    I have never had a problem with the Big Tilton super starter, I currently have one with 16 volts- cranks like a son of a gun on a 555.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy