Results 1 to 2 of 2

Thread: how do i non-ecu my 92?

  1. #1
    Junior Member APPRENTICE
    Join Date
    Nov 2007
    Location
    hickory,n.c.
    Posts
    12

    how do i non-ecu my 92?

    i have a 92 camaro im putting a 383 stroker in. What is the best way to bypass my computer and keep my gauges working. im dying to get all those ugly wires off my car.

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    May 2006
    Posts
    2,044
    As far as wiring up the HEI distributor, that's as easy as running a 16 gage wire from your ignition switch to the new HEI dist, but the tach is fed from your old dist, so you'll need to find a wiring diagram for your car and find out which wire feeds the tach then simply hook it up to the tach output on the new HEI dist. If your not using any of the computer controlled junk anymore you wont need about 2/3 of the wires currently under the hood, so refer to that wiring diagram again and find the wires that feed your gauges like, E>I. engine coolant temp sending unit and oil pressure gauge sending unit, amp gauge and or alternator light etc, then cut and toss the rest.

    Goodluck, Charles
    ***IN GOD WE TRUST***


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy