Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: looking to build a stroker

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Nov 2006
    Posts
    4

    looking to build a stroker

    Looking for a good recipe, to build a 600 hp small block chevy on pump gas.... any help would be great ..

  2. #2
    Junior Member SHOW GUEST
    Join Date
    Nov 2006
    Posts
    4
    No spray....

  3. #3
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    A 406ci motor should do it without much effort, 383 would also. Will this be a street motor or what ? Pump gas ?
    David Lanning
    IHRA NHRA 387B

    Fleenor Racing Transmission
    419-280-1406
    Lanning Electric
    Complete Drag Car Wiring
    APD Race Engines
    www.apdracing.com

  4. #4
    Junior Member SHOW GUEST
    Join Date
    Nov 2006
    Posts
    4
    street/strip .. was basically looking for wich rods ,pistons,crank,heads, etc Thanks for the reply..

  5. #5
    Senior Member MASTER BUILDER
    Join Date
    Jul 2006
    Posts
    184
    Just built one. 406, Scat cast steel crank, Scat H-beams, Srp pistons, Pro-1 Platinumn 230's with a bit of work, mild solid roller, Super Vic, QF 950carb. 615hp and 540 ft/lbs on pump gas

    Frank
    Advanced Performance
    www.get-ap.com

  6. #6
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    Location
    KIEFER, OK.
    Posts
    1,309
    Quote Originally Posted by Pwmax
    Just built one. 406, Scat cast steel crank, Scat H-beams, Srp pistons, Pro-1 Platinumn 230's with a bit of work, mild solid roller, Super Vic, QF 950carb. 615hp and 540 ft/lbs on pump gas

    Frank
    Advanced Performance
    www.get-ap.com
    Would you mind if I ask the compression ratio on this? Thank.

    Curtis

  7. #7
    Junior Member SHOW GUEST
    Join Date
    Nov 2006
    Posts
    4
    Is that on pump gas ? what size bore and stroke? thanks in advance for youre help.. I see you have a website can you sell me all prts?

  8. #8
    Senior Member MASTER BUILDER
    Join Date
    Oct 2003
    Posts
    144
    I had a sbc stroker built with Compstar components and I was pretty happy. It's made overseas but final machining is dome by calais.
    4" stroke 4.155 bore is a good combo. compression should be no more than 10-1 for pump gas, Brodix track ones ( cnc) should make 650 hp on that setup.
    Al

  9. #9
    Senior Member MASTER BUILDER
    Join Date
    Jan 2008
    Posts
    146
    are you wanting to stroke it- or (de)stroke it?
    like a 400 chevy crank in a 350-
    or a 350 crank in a 400- with a long rod ,and custom pistons?
    a 350 is only borable to how much? :idea:

  10. #10
    Senior Member EXPERT BUILDER
    Join Date
    Jan 2005
    Posts
    336
    im guessing 12 to 1 compression!perhaps more...


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy