heads for 505 chev
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Dec 2004
Posts: 4
heads for 505 chev
I am building and engine for my unlimited light hydroplane that races on water from courses between 1 mile and 1.5miles (ovals like nascar on waTER). The engine rpms would be from 3500 to 8000. once the race starts, the engine is wfo, there is rpm loss in the corners but not below 5000. velocity should be more important than sheer cfm. so....what would be a good head/intake combo. There are no rules governing this.
thanks in advance
thanks in advance
#3
Senior Member
EXPERT BUILDER
Join Date: Jan 2005
Posts: 336
actually the canfields 310 advertised flow numbers are remarkable.price is very good also.dont know anyone who bought them before though...but if your gonna go that approch of just cleaning bowls and gasket matched ports you may wanna think about em.but if you can swing the afr 315 cnc ported heads id make those probably a best fit cyl. head for you!
#4
Member
MASTER JOURNEYMAN
Join Date: Apr 2005
Posts: 41
if intrested i have a set of afr 315 cnc ported with jesel valve train complete only have 5 passes on them bought them this 2007 motors out and apart going bigger make me an offer also have merlin intake 4500 flange matched to heads. also is brand new.