Results 1 to 7 of 7

Thread: Chassis engineering struts

  1. #1
    Junior Member APPRENTICE
    Join Date
    Jul 2005
    Posts
    12

    Chassis engineering struts

    Has anyone ever put spindle mount wheels on chassis engineering struts??? I have called Chassis eng. but after 25 minutes of waiting I finally got someone on the phone and he told me "not sure it's possible" so I'm still looking for answers.... Scott

  2. #2
    Senior Member DYNO OPERATOR
    Join Date
    Nov 2006
    Location
    NC
    Posts
    558
    not that famillar with there struts but ask em what the spindle size is! I know strange sells em with anglia or a strange spindle!!! so if they can give you diminsons (sorry cant spell so good some times), then cross em over to strange by calling -talk to jeff he should know!!!!! David,

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Dec 2006
    Posts
    272
    scott, not sure what you are asking here, chassis engineering website shows only strange struts that they sell.
    strange struts kits are all the same execept that they offer them with 3 different brake kits , light med and heavy duty. Same strut, different brake kit.
    Do you already have the struts?? What is it you are looking to do here...??
    Ed

  4. #4
    Junior Member APPRENTICE
    Join Date
    Jul 2005
    Posts
    12

    struts

    Yes, I already have the Chassis Engineering struts on my car. They are a couple of years old but still new, only like 15 passes on them. I would like to put spindle mount wheels on front of my car but can't seem to find out which ones will fit. It's not so much as the spindle mounts fitting the spindle, it's the brake assembly matching up thats the problem. I don't know what to order and C E don't seem to know either.
    Thanks
    Scott

  5. #5
    Senior Member DYNO OPERATOR
    Join Date
    Nov 2006
    Location
    NC
    Posts
    558
    What brake setup???

  6. #6
    Senior Member EXPERT BUILDER
    Join Date
    Dec 2006
    Posts
    272
    it seems chassis engineering sells strange struts....look on the side of your struts opposite the spindle and see if it says "strange" on it. If so, give strange a call and order their light weight (spindle mount) brake kit.
    You will need to tell them what wheel you want to run , as there are 2 different offset hats available.
    Ed

  7. #7
    Junior Member APPRENTICE
    Join Date
    Jul 2005
    Posts
    12
    Mine says Chassis Engineering on them.... So I'll probably end up having to change struts to get the spindle mounts?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy