Methanol Exhaust Temp

Old 07-10-2007, 03:49 PM
  #1  
jhnss396
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Nov 2004
Posts: 15
Default Methanol Exhaust Temp

:?: Can anybody tell me the ideal exhaust temperture using methanol.
jhnss396 is offline  
Old 07-10-2007, 04:54 PM
  #2  
davis419b
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2005
Location: Wylie,Texas
Posts: 276
Default

Done!
davis419b is offline  
Old 07-10-2007, 07:28 PM
  #3  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Damn, (davis419b)

You know your sh*t, it should not exceed 1150 at anytime, preferablie between 1,000 and 1,100 as a high temp reading.
Granted you can run faster if you run leaner but you better have a sponser, because you will melt down a lot of parts at a higher temp.

my .02

Zip.
zipper06 is offline  
Old 07-11-2007, 06:46 AM
  #4  
jhnss396
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Nov 2004
Posts: 15
Default

I run BLP pump and 1250 carb. how much timing is good without hurting parts?
jhnss396 is offline  
Old 07-11-2007, 07:08 AM
  #5  
davis419b
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2005
Location: Wylie,Texas
Posts: 276
Default

Done!
davis419b is offline  
Old 07-11-2007, 08:09 AM
  #6  
jhnss396
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Nov 2004
Posts: 15
Default

I run methanol. 212 jets. 632 BB chevy. it runs in the 4.80's in the 1/8. worthy dragster.
jhnss396 is offline  
Old 07-11-2007, 08:12 AM
  #7  
jhnss396
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Nov 2004
Posts: 15
Default

Just got the data logger working. Just trying to fine tune.
jhnss396 is offline  
Old 07-11-2007, 08:23 AM
  #8  
davis419b
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2005
Location: Wylie,Texas
Posts: 276
Default

Done!
davis419b is offline  
Old 07-11-2007, 09:45 AM
  #9  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

I agree with Davis you have a miss in that combo, a worthy is a light car and that big motor should easily be a 4.6-7 car even with conv. heads. Shot us some more info on the combo.

The egt should be around 1150-1200 in the 1/4. I have noticed when using 2 different egt gauges/probes that it may be atleast a 100 different from the other. Just need to get close and tune from there.
hammertime is offline  
Old 07-11-2007, 12:57 PM
  #10  
jhnss396
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Nov 2004
Posts: 15
Default

632 Bodix 2x heads, 14.7 comp, 4.10 gear, 33x 16 tires, stall seems to be around 6000. Haven't run it in the 1/4 yet, will this weekend at Super Chevy at IRP.
jhnss396 is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -