sbc stroker oil pan
#1
Junior Member
JOURNEYMAN
Thread Starter
Join Date: May 2007
Location: Pfafftown , NC
Posts: 28
sbc stroker oil pan
Thanks in advance, I'm currently trying to put a little 383 together, my question is will I need a special oil pan with clearancing for the crank or can I run a stock pan with the 3.750" crank and 6.0" rods.
#2
Junior Member
APPRENTICE
Join Date: Aug 2005
Location: Philadelphia, PA
Posts: 14
I have a 383 wth 5.7rods and really wanted a clear zinc Moroso pan.
The 20195 is nice but clearenced for a 4.2 stroke and is overkill. The 20194 is what i have and fits and works perfect with the 3.75 stroke.
Moroso also told me that the 20190 is there best seller but its red and i wanted the Zinc. Good luck.
The 20195 is nice but clearenced for a 4.2 stroke and is overkill. The 20194 is what i have and fits and works perfect with the 3.75 stroke.
Moroso also told me that the 20190 is there best seller but its red and i wanted the Zinc. Good luck.