Rpm issue with 7al2

Old 06-07-2016, 11:32 AM
  #1  
gribbleracing
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2016
Posts: 1
Default Rpm issue with 7al2

My dragster has a mega 450,7al2 three step ,rpm activated switch and msd flying magnet i am having an issue with the rpms when i set the button to do a burnout with a 6000 pill in it it only goes to 4000 then when i set the trans brake and hit the throttle no matter what i have it it will not go above 3200 and thats even without a rpm dial or pill in it at all i am completely lost on this i also took the three step out of the 7al and juat put a 3000 pill in it and it did ok holding, then i put a 4000 in it and it only went to about 3600 this car is new to me and it has every possible eloctronic it can have in it so not sure if it is the 7al box or what
gribbleracing is offline  
Old 06-12-2016, 05:54 AM
  #2  
BigBlockMark
Senior Member
MASTER BUILDER
 
Join Date: Mar 2014
Posts: 244
Default

Crickets here. Go onto Yellow Bullet forums and ask your question there. Someone will help you.
BigBlockMark is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -