Easier and better...
http://www.summitracing.com/parts/EDL-9300/
Best stuff you'll ever come across for gaskets. As long as the ports line up, you don't have to worry about anything else when using that stuff.
It's like a rubber cement. Apply it to head, and gasket, let it tack up for about 10 minutes, and install it with a rubber mallet.
Put it on the intake and intake side of the gasket, let it set up, bolt the intake on. If you have ANY leak after doing that, there's a MAJOR issue with your head or intake.
I blew out an entire set of intake gaskets with RTV on them at 33 PSI of boost... Put that stuff on, and no more issues.