nye's automotive
Has anyone had a motor built by these guys and was not happy with it? I'm thinking about getting a motor built and was looking at dynoflo and ohio crankshaft also. Can anybody help me pick the right one to go with? Thanks
|
Nye's out of the three..
where do you live ?..if you were considering going some distance for your motor i like PAR Racing Engines out of S.C. ( Scott Duggins is the onwer)..864-578-5622...His 565's with oval port heads are makng right at the 1050hp range..and they running these things round,after round after round..with no problems and minimum maintenance other than the preventive norm.... just my 2 cents. |
Reher Morrison.
|
I live in Louisiana, I'm looking to build a big chief motor, I already have a square port tunnel ram with two 1150's. The intake is for 18 degree heads so I plan on going with brodix pb1802 with titanium intake valves and the intake is already drilled for a fogger system. This will be in a drag radial car weighing about 3400 lbs.
|
I have a Nye's 582 in my car and know Pat (one of the owners) personally he is a heck of a nice guy and wont do you wrong ! DO NOT buy from Dynoflo. Nyes stuff works good and prices are great ! Machine work is top notch !
|
Read this thread and you won't even think about dyno-blow
http://forums.racingjunk.com/viewtop...hlight=dynoflo |
Thanks, I spoke with Pat the other day but just wanted to hear what everyone had to say. He seemed to be a honest and helpful guy but it never hurts to be safe. I guess he will be the one doing my motor. Thanks for all the input.
|
ReherMorrison....
|
reher morrison told me they won't make anything larger than 620 inches
|
Originally Posted by michael1
reher morrison told me they won't make anything larger than 620 inches
|
All times are GMT -8. The time now is 04:48 AM. |