Ad #1428145 Posted:2009-11-04 10:03:41
This ad expired 69 days ago.
SONNY'S EXTREME 892 C.I. 5.3 BORE CENTER
2070 H.P( NO NITROUS) 6.30's with auto trans
2070 H.P( NO NITROUS) 6.30's with auto trans
$85,800.00
NEW WORLD RECORD!!!, THIS SAME ENGINE COMBINATION JUST PROPELLED FRANK TAMEZ TO THE QUICKEST NATURALLY ASPIRATED ENGINE,(NO NITROUS) WITH AN OEM AUTOMATIC TRANSMISSION IN THE WORLD!!! HE RAN AN ASTOUNDING 6.38 @ 217 MPH, IN OVER 3000 FT OF AIR, WITH THE CAR WEIGHING 2445 LBS !! CONGRATS FRANK !!
ANYBODY ELSE WANTING TO ROTATE THE EARTH LIKE FRANK DID, WE ARE OFFERING A SPECIAL
THE EXTREME PRO STOCK 892 C.I.
2008 892 CU. IN. ENGINE WITH SONNY'S DESIGN
5.300" B.S. GM HEMISPHERICAL CYLINDER HEADS.
2075 NATURALLY ASPIRATED H.P.@ 8100 RPM 1410 FT. LBS TORQUE @ 6500RPM
Special Features:
*--Sonny's 892ci GM Hemispherical headed engine features Ultra Lite CNC program that weighs 2 lbs less than the 784 ci Hemispherical headed engines.
*--Sonny's 5.300" GM Hemispherical head has a 1.600" longer bore spacing than the 5.000" GM Hemispherical heads
*--Four Braswell 2bbl carburetors featuring 2.400" throttle bore feed pistons with 16.0:1 static colmpression
*--The cam has a gross lift of 1.200" with a 1.85 rocker arm ratio with .685 lobe liftl
*--The 5.300" cylinder head's intake runner has a volume of 652cc while the exhaust is 212cc which flow 660cfm @ 1.100" lift with a 2.725" valve on the intake and 470cfm @ 1.100" lift with a 2.100" valve on the exhaust
Sonny's in-house fully CNC ported "Next Generation" Hemi cyl. heads
SAR Special Billet Aluminum 5.300" B.S. block with 1.100" raised cam
Bryant billet crank
BME 426 aluminum forged rods
Venolia pistons
Jesel keyed lifters
1.031" tool steel taper-wall pins
Federal Mogul "Hell Fire" rings
Special titanium valves & PSI springs
SAR shaft mounted rocker system with needle bearing roller tips
Jesel belt drive
Daley 6 stage dry sump oiling
Star vacuum system
ATI balancer
MSD cranktrigger ignition
SAR sheetmetal 4x2 intake with linkage
SAR/BLP (4) 2 barrel split dominator carbs
Sheetmetal billet rail valve covers
Meziere hi-flow electric water pump
Pro series CSI starter
Fuel lines with 4 port regulator
This baby comes complete!!
ONLY 85,800.00
YOU SAVE 2000.00 OVER THE REGULAR PRICE
CALL TODD @ 509-710-6544 AND ORDER YOURS TODAY !!
Seller Phone Number: 509-710-6544
This item is NEW
Trades NOT ACCEPTED
Item Location: DEER PARK, WA Get Directions To This City
ANYBODY ELSE WANTING TO ROTATE THE EARTH LIKE FRANK DID, WE ARE OFFERING A SPECIAL
THE EXTREME PRO STOCK 892 C.I.
2008 892 CU. IN. ENGINE WITH SONNY'S DESIGN
5.300" B.S. GM HEMISPHERICAL CYLINDER HEADS.
2075 NATURALLY ASPIRATED H.P.@ 8100 RPM 1410 FT. LBS TORQUE @ 6500RPM
Special Features:
*--Sonny's 892ci GM Hemispherical headed engine features Ultra Lite CNC program that weighs 2 lbs less than the 784 ci Hemispherical headed engines.
*--Sonny's 5.300" GM Hemispherical head has a 1.600" longer bore spacing than the 5.000" GM Hemispherical heads
*--Four Braswell 2bbl carburetors featuring 2.400" throttle bore feed pistons with 16.0:1 static colmpression
*--The cam has a gross lift of 1.200" with a 1.85 rocker arm ratio with .685 lobe liftl
*--The 5.300" cylinder head's intake runner has a volume of 652cc while the exhaust is 212cc which flow 660cfm @ 1.100" lift with a 2.725" valve on the intake and 470cfm @ 1.100" lift with a 2.100" valve on the exhaust
Sonny's in-house fully CNC ported "Next Generation" Hemi cyl. heads
SAR Special Billet Aluminum 5.300" B.S. block with 1.100" raised cam
Bryant billet crank
BME 426 aluminum forged rods
Venolia pistons
Jesel keyed lifters
1.031" tool steel taper-wall pins
Federal Mogul "Hell Fire" rings
Special titanium valves & PSI springs
SAR shaft mounted rocker system with needle bearing roller tips
Jesel belt drive
Daley 6 stage dry sump oiling
Star vacuum system
ATI balancer
MSD cranktrigger ignition
SAR sheetmetal 4x2 intake with linkage
SAR/BLP (4) 2 barrel split dominator carbs
Sheetmetal billet rail valve covers
Meziere hi-flow electric water pump
Pro series CSI starter
Fuel lines with 4 port regulator
This baby comes complete!!
ONLY 85,800.00
YOU SAVE 2000.00 OVER THE REGULAR PRICE
CALL TODD @ 509-710-6544 AND ORDER YOURS TODAY !!
Seller Phone Number: 509-710-6544
This item is NEW
Trades NOT ACCEPTED
Item Location: DEER PARK, WA Get Directions To This City
Seller Phone Number: 509-710-6544
This item is NEW
Trades NOT ACCEPTED
Item Location: DEER PARK, WA Get Directions To This City
This ad expired 69 days ago.
Dealer Information
Ad posted by:
toddsrace (#56651)
Sonny's Racing Engines
352 Training Center Rd.
Lynchburg, Va 24502
509-710-6544 
Member Since: 2004-10-01
Phone Number: 509-710-6544
Member Feedback
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
REPORT THE SALE, CLICK HERE
PAID SPONSORSHIPS
Member's Other Ads
- 16x16 SPINWERKES DBL. BEADLOCK RIMS
- 2005 NRC 35' M/HOME & 28FT ALUM. STACKER
- Sonny's New 864 5.3 Bore Space Wedge Engine
- GEORGOUS 63 BICKEL CORVETTE PRO MOD
- Ultimate 632 Bracket Engine for T/S, T/D
- BRAND NEW COAN TURBO 400 XLT TRANSMISSION
- RICKIE SMITH'S 784 C.I. BUCK RACING ENGINE
- RACEPAK SPORTSMAN SERIES RECORDER
- THE ULTIMATE LIGHTWEIGHT BATTERY IS HERE
- EX- RICKIE SMITH 738 BUCK ENGINE
Your Recently Viewed Ads
RESOURCE LINKS
- Financing
- Transportation/Shipping
- Purchase Protection
- Automotive
| Home | Classifieds | About | Contact | Store | Media Kit | Advertise | Affiliate Program | Pricing Guide | FAQ | Send Link to a Friend |
|
Copyright ©2005 RacewayMedia LLC All Rights Reserved.
Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacewayMedia LLC Terms, Classified Guidelines and Privacy Policy |
|
Raceway Media, LLC
PO Box 491, North Adams, MA 01247 Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com |
|
Execution Time: 202 ms |