1982 Camaro Back Half car, Moser Aluminum center section, 35 spine 9" Ford rear end. This is being sold as a ROLLER, no motor and trans. Very little needs to be done, install your motor and trans, might need new batteries, and the slicks need to be replaced.

-Moser Aluminum 9" FORD center section (This rear end with Willwood brakes costs $3500)
-35 Spine Moser Axles
-4.86 Pro Gears
-4 link suspension, New heavy duty heim joints
-Strange adjustable coil over back shocks (new shocks were $500.00)
-14X32 Good Years,
Willwood disc brakes on back, slotted stock size rotors on the front
-Car just went out of certification 2008.
-Setup for TH400, 4" Drive shaft Included (Cost $400.00)
-B&M pro ratchet shifter for TH350/TH400
-Delay box, MSD 7AL, rev limiter and trans brake RPM control ( Cost over $1000.00)
-Magna Fuel 300 pump, -10 line to MagnaFuel Regulator (fuel system costs over $1000.00)
-Griffin Alum Radiator and Electric fan
Braided trans lines and trans cooler.
-All Automerter Gauges, 8000 RPM tack w/ Shift light. (over $500 in gages)
-Air / Fuel wideband with bosh ozigen sensor. ($300.00)
-Weld Wheels (cost $1000.00)
-After market heavy duty TH400 cross member
-After Market front K-Member. ( the K-member with A Arms and Rack setup is over $1000.00)
-Rack & pinion steering
-Everyting is wired through a PAINLESS switch panel, the car is ready to go!
The cost to have someone do the back half on a car, just labor is usually $3000.00
-The paint job on this car would cost at least $3000.00
-The roll cage would cost at least $1500.00

The pictures do the pain no justice! The color is Blue/Purple over Silver. There is a micro multi color flake in the clear. The car looks awesome in person!

Over $20,000 invested in this car. This can be setup with a SBC or BBC, car weighed (2800 lb's w/SBC) (3000 lb's w/BBC) w/o driver. The car is Silver/Purple with a micro flake. Car went 10.10 with a 383 SBC, and 9.20's @147 mph with a 565ci BBC.