PROCOMP SBC 210CC Street/Strip ALUMINUM CYLINDER HEADS

TO PURCHASE PLEASE CALL OUR ENGINE PARTS SPECIALISTS AT 1-585-216-1200 MON-FRI 8-5PM

PART# PC-3003A (ANGLE PLUG) PC-3003S (STRAIGHT PLUG) **PLEASE CHOOSE

SOLD AS A FULLY ASSEMBLED PAIR

THESE ARE 210CC INTAKE RUNNER WITH 64CC CHAMBERS

Find a better deal on these Procomp heads? Keep in mind that we are using top shelf components. Other cheaper listings do not have the high quality parts.

HIGH GRADE ALUMINUM, BRONZE VALVE GUIDES, HARDENED SEATS, ADVANCE PORT DESIGN FOR GREATER AIR FLOW, 3-ANGLE COMPETITION VALVE JOB.

Dual-Quench combustion chambers are more efficient for increased power and torque compaired to heart shaped chambers

PC-3003 Flow Numbers:

Intake / Exhaust
.100 63.0 .100 52.2
.200 117.1 .200 97.8
.300 163.1 .300 132.9
.400 203.5 .400 161.9
.500 230.3 .500 180.0
.600 248.2 .600 189.2
.700 252.2 .700 192.1

THESE HEADS ARE ASSEMBLED WITH THE FOLLOWING COMPONENTS
*
COMP CAMS SUPER LOCK RETAINER
o
4140 CHROME MOLY
o
7* LOCK ANGLE
*
COMP CAMS STEEL SUPER LOCK VALVE LOCKS
o
7* LOCK ANGLE - GREEN
*
VALVE SPRINGS W/DAMPER - BLUE STRIP SPRINGS
o
INSTALLED @ 1.750 - WILL WORK WITH HYDRAULIC CAMS AND SMALL ROLLER CAMS
o
.550 NET VALVE LIFT
o IF YOU ARE RUNNING A SOLID CAM OR ROLLER WE MUST USE A DIFFERENT SET OF SPRINGS AND POSSIBLY LONGER VALVES.
*
PERFORMANCE VALVES Exh 1.60/Int 2.02
o
Non-Magnetic Stem STAINLESS STEEL MATERIAL
o
CHROME STEMS AND HARD TIPS
o
SWIRL POLISHED AND FULLY MACHINED
*
HARDENED 5/16 PUSH ROD GUIDE PLATES
o
COMES STANDARD WITH FLAT GUIDE PLATES
*
ROCKER STUDS - Long Style for use with Poly-locks
o
COMES STANDARD WITH MANLEY 3/8" STUDS
*
MANLEY PERFORMANCE VITON STEEL JACKET VALVE STEM SEALS

**COMP CAMS BIG SPRING OPTION FOR UP TO .600 LIFT IS $699.95**


BELOW IS OUR ASSEMBLY PROCESS

* EVERY VALVE IN THE HEAD IS NUMBERED AND HAND LAPPED TO ENSURE THAT THE VALVE IS SEATED PROPERLY
* THE HEADS ARE WASHED IN INDUSTRIAL DETERGENT - MAKING SURE THAT ALL LOOSE METAL CHIPS, GREASE AND DIRT ARE CLEANED AND REMOVED
* VALVES SPRING INSTALLATION HEIGHT IS CHECK ON EVERY VALVE AND HARDENED SHIMS ARE USED TO +- .005
* WE THEN INSTALL THE VALVE TRAIN - WE USE ASSEMBLY OIL SO YOU DO NOT HAVE TO WORRY ABOUT A VALVE STICK UPON INITIAL START-UP
* GUIDE PLATES AND ROCKER STUDS ARE INSTALLED - WE USE ANTI-SEIZE AND THREAD SEALANT WERE NEEDED
* HEADS ARE INDIVIDUALLY BAGGED AND BOXED FOR SHIPMENT

These heads have a Thick deck design so they can be used on Nitrous, Turbocharged and Supercharged applications.

Our heads work with most popular aftermarket intakes such as Edelbrock Performer, Performer RPM, Air-Gap and Victor Jr.

Dual Pattern Valve Covers will accept either Center Bolt or Perimeter bolt valve covers.

Dual Pattern Intake manifold to accept early or 87-95 intake manifold

Big Benefits for SBC motors such as 302, 327, 350, 383 & 400* Small Block Chevy Engines up to 1986. 64CC Combustion Chambers improve performance and retains stock compression on 1970 and earlier small-blocks.

*400 - Requires drilling steam holes, we do offer this service. Please e-mail for detail's.

We have been in the engine business since 1924 with over 80 years of combined service -- you are dealing with the best & most knowledgeable staff!

TO PURCHASE PLEASE CALL OUR ENGINE PARTS SPECIALISTS AT 1-585-216-1200 MON-FRI 8-5PM

OUR WAREHOUSE IS LOCATED IN UPSTATE NY

UPS GROUND SHIPPING IS $40.00 (CONTINENTAL USA ONLY!)

CANADA SHIPPING IS $130.00

Seller Phone Number: 1-585-216-1200

Seller Phone Number2: 1-585-216-1200

This item is NEW

Trades NOT ACCEPTED

Payment options:

Item Location: ONTARIO, NY Get Directions To This City

Instructions for buyer:  NO NEW YORK SALES PLEASE, BUYERS MUST CONTACT THEIR LOCAL F/A PRODUCTS AFFILIATE. FEEL FREE TO CALL US FOR A DIRECTORY.

This ad expires in 9 days.