Race Ads | For Sale: 1938 Chevy Rat Rod Truck 1 of a Kind

You are not logged in.
[Login] [Sign up]

AD CATEGORY :: Hot Rod/Street Rod/Custom :: Chevy Small Block 1937-1959Main Category

Ad #1580664 Posted:2009-06-22 18:12:40

This ad expired 75 days ago.

1938 Chevy Rat Rod Truck 1 of a Kind
100% Custom Hand Fabricated Rat Rod Pickup

$10,000.00

I have found two projects I would like to have, but I need some cash flow. So I must sell this in order to move on to the next. Any offer $9,500 or better buys it. Show up at my door with cash and you might be surprise what I would do. Looking to do Lead Sled next so bring on the trade offers.

I own my own small business and can accept your credit card as payment.

Above Added: Thu August 27, 2009, 8:45 am EST

Posted video on You Tube for those of you that would like to here it run.

http://www.youtube.com/watch?v=ArQYdTNpB60

Above Added: Sun August 23, 2009, 9:48 pm EST

Price Lower $2,000. Don't ask me go go lower this in my bottom dollar. Really want to trade for another project plus cash so I can build another. Rat Rods and Lead sleds preferred, but I will consider anything.

Above Added: Mon August 17, 2009, 1:18 pm EST

This truck was taken to two local car shows. Won first place at one and second place at the other in the Rat Rod category. You will not be disappointed.

Above Added: Tue June 23, 2009, 8:51 am EST

1938 Chevy Rat Rod Truck – 1 of a Kind – Hand Fabricated

100% Hand built, custom rat rod truck: Frame is a 2x3 square tube chassis. Rear end is out of a 1985 Ford Crown Victoria 8.5” Ford differential with 3.08 open gear. Rear suspension is a custom 4 link that uses the stock Ford components with chassis engineering coil over adjustable shocks and springs attached to the factory shock mount. Front suspension is a straight axle from a 47 Chevy pickup mounted model A style with a single mono leaf spring and two shock absorbers each forward arm. Stock ford drum brakes on the rear, New disk brake conversion kit on the front axle from speedway motors. Steering box and column from 47 Chevy pickup. All steering linkages are new from Speedway motors. Rims are stamped steel 16” 6 bolt Chevy on front and 16” 5 bolt Ford on rear. Tires are like new and all 4 match.

Body: Hand built from 1 inch square tubing and steel. Corners were hammered into shape. All welds left in place nothing sanded smooth. Cab and Box are not some junk yard save. All sheet metal is brand new and custom fabricated. New custom made seats from “Stitchen Bitch” custom covered in red and black leather to match the exterior paint scheme. Paint is Flat black implement paint with “IH” red used for the scallops and firewall. Trans tunnel is an old oil pan from a previous race car engine that grenaded. Steering column is supported on top by 2 connecting rods welded together end to end. The interior is covered with stickers from all my previous race cars. New 4 point seat belt harness. From the Ground to the top of the cab measure 39”.

Drive Train: Small Block Chevy 350 bored .030 over. Stock pistons, crank and rods. Crane Engergizer 292 cam with hydraulic lifters and Pete Jackson gear drive. Hurricane High rise open plenum intake Holley 600 CFM vacuum secondary carb. MSD distributor, MSD Blaster 2 coil and MSD 6AL box with 6800 rpm rev limiter chip. All electronics are hidden and I used a points style cap for the old school look. Transmission is a turbo 350 race prepped with 2500 rpm stall converter, reverse manual shift pattern and transbrake. Tons of fun at a stop light. Rear end is an 8.5 For with 3.08 gear and open carrier. Engine has more than sufficient power for the lightweight body. Fuel tank is a 15 gallon tank from a Farmall Tractor and fuel pump is a holley blue with regulator.

Legal Stuff: I have a clear title to the truck that says it is a 1938 Chevy Pickup. The only part on the entire truck that is off the 38 Chevy is the horn. However it is 100% legal. I currently have Missouri Historic Vehicle plates on it and have it insured and drive it as often as I can. I have taken it on 2 trips of approximately 80 mile round trip. I would not want to go much more than 100 miles and you rear end tends to get numb. Buyer responsible for transportation. I will accept cash, wire transfer and for a 4% fee you Mastercard or Visa. Vehicle is sold as is no warranty!

Seller Phone Number: 660-425-6299

Seller Phone Number2: 660-868-1020

This item is USED

Trades ACCEPTED: Trades for other Rat Rods, T buckets or a Coupe. Must have GM Engine/trans. Rat Rods and Lead Sled projects plus cash wanted.

Payment options:


Bank Wire/Cash

Item Location: BETHANY, MO Get Directions To This City

Instructions for buyer: Buyer to provide all transportation.

This ad expired 75 days ago.

Is this classified ad inappropriate?
Report it here

Seller Information

Ad posted by:
jeffejoy (#35725)

Member Since: 2004-02-06
Phone Number: 660-425-6299
Phone Number: 660-868-1020

Member Feedback
Number of Honor Payments: 20
Average Accepted Sale Price: $241.67
Average Honor Payment: $7.33

DID YOU BUY THIS ITEM?
REPORT THE SALE, CLICK HERE

OFFICIAL HONOR MEMBER
Honor Member Rating: 7

PAID SPONSORSHIPS

http://www.racingjunk.com/advertise/contactsales

Member's Other Ads

1946 Ford 4 Door Sedan

Your Recently Viewed Ads